31 posts / 0 new
Last post
AEM_JR
AEM_JR's picture
Offline
Last seen: 13 hours 11 min ago
Joined: 05/26/2014 - 00:08
CAN Configurations for 3rd Party Hardware

Here are 3rd party CAN Setup files, sorted by Manufacturer.

In cases where the CAN data-streams definition source is listed as the mfg spec sheet, these files were created by AEM, based on the mfg's published CAN spec sheet but we do not have a reference hardware in house to validate the file with. In these cases AEM only states that they do appear to import properly into AEM DashDesign and that a reasonable attempt was made to adhere to the mfg's published spec. They are posted here as reference files only and without any warranty whatsoever. It is up to the user to confirm that every channel they use is reading properly.

In cases where a file is listed as "AEM Tested", this means that the CAN setup was run using the 3rd party hardware connected to a CD7 display and AEM was able to confirm that data was being received without transmission errors and with the formats appearing to be correct. In many cases it is impossible to manipulate the test device so that every possible data transmission variation can be observed and validated, In those cases we can only confirm that we are receiving clear data on those channels.

In cases where a setups origination source is the manufacturers own file, then these are CAN Configuration files that are already published by the devices manufacturer. Note, we have no knowledge regarding 3rd party mfg testing of their own files and list them simply for your convenience.

In many cases the channel names have been modified to the universal names used by the CD-7. This is done to have as many channels "just work" as possible. If this were not done and if a CAN setup had a unique name for a very common channel then that channel would need to be manually mapped by the end user. When choosing common names for channels every effort is made to make them easily understandable and obvious. In most cases the changes are limited to removing spaces, underscores etc...

e

This thread will be periodically trimmed and some posts deleted to keep the discussion up to date and less confusing. For example, if someone requests an app that is not supported but support is later added, the request and the confirmation of addition posts may both be deleted after the main post information is updated.

Right click on the file to save to your computer.



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
M1200 Modular Engine Control Units
M2000 Modular Engine Control Units
M6000 Modular Engine Control Units
eMod013 / Mazda RX8 S1 Plug-in ECU
eMod009 / Mazda RX7 S4 Plug-in ECU
eMod010 / Mazda RX7 S5 Plug-in ECU
eMod011 / Mazda RX7 S6 Plug-in ECU
eMod012 / Mazda RX7 S8 Plug-in ECU
eMod016 / Mazda MX5 NB8A Plug-in ECU
eMod017 / Mazda NB8B/NB8C Plug-in ECU
eMod003 / Nissan Gen1 S14 Plug-in ECU
eMod004 / Nissan Skyline Plug-in ECU
eMod005 / Nissan S13 S14a S15 Plug-in ECU
eMod006 / Nissan R34 Skyline GTT Plug-in ECU
Aug 22nd, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
AnalogX 4 Channel Analog to CAN Module
Oct 3rd, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
BigStuff3 Gen4 Pro Xtreme Engine Control Units
May 1st, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
MS 3.0 Sport Engine Control Units
Jan 13th, 2017
MS 4.0 Sport Engine Control Units
Jan 13th, 2017
MS 4.3 Sport Engine Control Units
Jan 13th, 2017
LT4 Lambdatronic 4 Channel Lambda Controller
Jan 13th, 2017
Bosch 2 Axis Accel and Yaw (Subaru P/N 27542FG000)
Mar 3th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
WEGO5, Wide Band 2-Channel CAN Module
Mar 16th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
S40 Pro Engine Control Units
S60Pro Engine Control Units
S80Pro Engine Control Units
S100Pro Engine Control Units
Jan 10th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
EMU Engine Control Unit
Feb 24th, 2017
EMU Black Engine Control Unit
Feb 23rd, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
Euro-4 Engine Control Units
Jun 18th, 2018
Euro-8 Engine Control Units
Jan 25th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
X2 Engine Control Units
X5 Engine Control Units
R4 Engine Control Units
R8 Engine Control Units
R16 Engine Control Units
Mar 21st, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
TEC3r Engine Control Units
TECgt Engine Control Units
TECs Engine Control Units
TECm Engine Control Units
Feb 24th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
K3 Engine Control Units
K6 Engine Control Units
Jan 11th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
EM-Tech EM70 Engine Control Units
EM-Tech EM80 Engine Control Units
EM-Tech EM140 Engine Control Units
EM-Tech EM160 Engine Control Units
EM-Tech EM180 Engine Control Units
Mar 16th, 2018



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
KV8 Engine Control Units
KV12 Engine Control Units
KV16 Engine Control Units
KV16M Engine Control Units
SL4 Engine Control Units
SL8 Engine Control Units
Aug 3rd, 2018
Subaru STi 2006-07 Plug-in ECU
Subaru STi 2008-15 Plug-in ECU
Mitsubishi Evo 4-8 Plug-in ECU
Mitsubishi Evo 9 Plug-in ECU
Nissan R32-R34 GTR Plug-in ECU
Nissan R35 GTR Plug-in ECU
Yamaha YXZ1000R Plug-in ECU
GT86/BRZ/FR-S Plug-in ECU
Aug 3rd, 2018



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
XFI 2.0 Engine Control Unit
Sept 15th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
31-001, 8 Channel Analog Expansion Module
Jan 19th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
MEFI-4b Engine Control Units
May 23rd, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
E11v2 Engine Control Units
E8 Engine Control Units
V1 CAN Protocol
Jul 6th, 2018
Elite 550 Engine Control Units
Elite 750 Engine Control Units
Elite 950 Engine Control Units
Elite 1000 Engine Control Units
Elite 1500 Engine Control Units
Elite 2000 Engine Control Units
Elite 2500 Engine Control Units
Elite 2500T Engine Control Units
Jun 4th, 2018
Elite VMS Vehicle Management System
Elite VMS-T Vehicle Management System
Jul 23rd, 2018
Platinum Sport 1000 Engine Control Units
Platinum Sport 2000 Engine Control Units
Apr 17th, 2018
Platinum Sport Plug-in GM Kit
Platinum PRO Plug-in Nissan R32/33 Skyline
Platinum PRO Plug-in Nissan R34 GT-T Skyline
Platinum PRO Plug-in Nissan R34 GTR
Platinum PRO Plug-in Nissan Z32 Fairlady 300ZX
Platinum PRO Plug-in Nissan S15, S14, S13
Platinum PRO Plug-in Nissan Y61 Patrol
Platinum PRO Plug-in Nissan Z33 350Z DBW
Platinum PRO Plug-in Mitsubishi Evo 9 MIVEC, Evo 8 MR
Platinum PRO Plug-in Honda EP3, DC5
Platinum PRO Plug-in Honda DC5/RSX
Platinum PRO Plug-in Honda S2000 AP1
Platinum PRO Plug-in Hyundai BK Theta Genesis
Platinum PRO Plug-in Subaru GDB WRX, STI
Apr 17th, 2018
Platinum Sprint Engine Control Units
Apr 17th, 2018
WB1, Wide Band 1-Channel CAN Module
Mar 16th, 2017
WB2, Wide Band 2-Channel CAN Module
Mar 16th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
HP EFI Engine Control Unit
Dominator EFI Engine Control Unit
Mar 7th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
KPro4 Engine Control Unit
Jan 5th, 2017
S300v3 Engine Control Unit
Nov 29th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
16-ch Tire IR Temp Sensor
Jan 10th, 2017
16-ch Brake IR Temp Sensor
Jan 10th, 2017
IR Temp Sensor
Jan 10th, 2017
6 DOF Inertial Measurement System
Jan 10th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
MD35 Engine Control Units
Feb 23rd, 2017
UEGO CAN Controller
Feb 23rd, 2017
4 Channel Thermocouple Module
Feb 23rd, 2017
4 Channel Wheelspeed Module
Feb 23rd, 2017
FlexFuel Module
Feb 23rd, 2017
2 Channel Electronic Throttle Control Module
Feb 23rd, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
F42 Engine Control Units
F88 Engine Control Units
F90 Engine Control Units
GDI Engine Control Units
Mar 14th, 2017
PDU10, 10 channel Power Distribution Unit
Jan 6th, 2017
PDU16, 16 channel Power Distribution Unit
Jan 6th, 2017
PDU32, 32 channel Power Distribution Unit
Jan 6th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
G4+ Fury Engine Control Units
G4+ Xtreme Engine Control Units
G4+ Storm Engine Control Units
G4+ Thunder Engine Control Units
G4+ Force GDI Engine Control Units
G4+ Kurofune Engine Control Units
G4+ Atom II Engine Control Units
G4+ Monsoon Engine Control Units
Jul 10th, 2017
300ZLink #N300+ Plug-in ECU
350ZLink #N350+ Plug-in ECU
AltezzaLink #TALT+ Plug-in ECU
BMWLink #E36+ Plug-in ECU
CivicLink #HC92+ Plug-in ECU
CivicLink #HC96+ Plug-in ECU
EVOLink #EVO3+ Plug-in ECU
EVOLink #EVO8+ Plug-in ECU
EVOLink #EVO9+ Plug-in ECU
FJ100Link #TFZJ100+ Plug-in ECU
GTRLink #NGTR+ Plug-in ECU
GTTLink #NGTT+ Plug-in ECU
MiniLink #MINI+ Plug-in ECU
MR2Link #TST185+ Plug-in ECU
MR2Link #TST205+ Plug-in ECU
MX5Link #MX5+ Plug-in ECU
RX7Link #RX7S6+ Plug-in ECU
RX7Link #RX7S7+ Plug-in ECU
S13Link #NS13+ Plug-in ECU
S15Link #NS15+ Plug-in ECU
SupraLink #TS2JZ+ Plug-in ECU
TTLink #TT+ Plug-in ECU
VLLink #HVLC+ Plug-in ECU
VR4Link #VR4+ Plug-in ECU
WRXLink #WRX104+ Plug-in ECU
WRXLink #WRX107+ Plug-in ECU
WRXLink #WRX2+ Plug-in ECU
WRXLink #WRX4+ Plug-in ECU
WRXLink #WRX6+ Plug-in ECU
WRXLink #WRX9+ Plug-in ECU
Aug 3th, 2018
CAN Lambda Module
Jun 15th, 2018



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
M90 ECU
M120 ECU
Aug 20th, 2018



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
MaxxECU Street
MaxxECU Sport
MaxxECU Race
MaxxECU Pro
Mar 13th, 2018



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
MicroSquirt Engine Control Units
May 16th, 2018
MS3-Pro Engine Control Units
MS3-Gold Engine Control Units
Megasquirt-3 Engine Control Units
Megasquirt-2 Engine Control Units
MSPNP Gen2 B8793 87-92 BMW E30 325i
MSPNP Gen2 EEC4A8 86-93 Ford Mustang 5.0
MSPNP Gen2 EEC4B8 94-95 Ford Mustang 5.0
MSPNP Gen2 MK9395 93-95 Probe MX6 V6
MSPNP Gen2 MM9093 90-93 Mazda Miata
MSPNP Gen2 MM9495 94-95 Mazda Miata
MSPNP Gen2 MM9697 96-97 Mazda Miata
MSPNP Gen2 MM9900 99-00 Mazda Miata
MSPNP Gen2 NS9501b 96-98 Nissan 240SX
MSPNP Gen2 NS8994 89-94 Nissan 240SX
MSPNP Gen2 NS9501a 1995 Nissan 240SX
MSPNP Gen2 NJ8994 Nissan S13 SR20DET
MSPNP Gen2 TS9395 93-95 Toyota MR2
MSPNP Gen2 TS9092 90-92 Toyota MR2
MSPNP Gen2 T8590 85-89 Toyota 4AGE/22RE
MS3ProPNP GNX8487 84-87 Grand National
MS3ProPNP E369395 93-95 BMW M50, S50
MS3ProPNP JZ9298 93-98 Toyota Supra
MS3ProPNP MM9093 90-93 Mazda Miata
MS3ProPNP MM9495 94-95 Mazda Miata
MS3ProPNP MM9900 99-00 Mazda Miata
MS3ProPNP MM0105 01-05 Mazda Miata
MS3ProPNP MSM0405 04-05 Mazdaspeed
MS3ProPNP SW0205 02-05 Subaru WRX
May 16th, 2018

Simplified
Dash



Advanced
Realtime

Simplified
Dash



Advanced
Realtime

Simplified
Dash



Advanced
Realtime



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
LT-9C Engine Control Units
LT-10C Engine Control Units
LT-15C Engine Control Units
LT-16C Engine Control Units
Apr 25th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
M400 Engine Control Unit
M600 Engine Control Unit
M800 Engine Control Unit
M880 Engine Control Unit
M84 Engine Control Unit
Jun 21st, 2017
See App Notes

M1 Engine Control Unit
Jan 26th, 2017
PDM15, Power Distribution Module
Jan 12th, 2017
PDM16, Power Distribution Module
Jan 12th, 2017
PDM30, Power Distribution Module
Jan 12th, 2017
PDM32, Power Distribution Module
Jan 12th, 2017
PLM, Pro Lambda Meter (contains both PLM1 and PLM2)
Jan 9th, 2017
LTC, Lambda to CAN Module
Jan 9th, 2017
LTCD, Lambda to CAN Dual Module
Jan 9th, 2017
E888/E816, Exp Module, 16 ana, 4 Freq & 4 Sw inputs
Jan 9th, 2017
E888/E816, Exp Module, 8 ana, 8 T/C, 4 Freq & 4 Sw inputs
Jan 9th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
Atomic EFI Throttle Body Fuel Injection System
Jul 10th, 2017
Power Grid System Controller
Mar 7th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
EGT-2000 8-Ch EGT Module
Apr 19th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
SQ6 Engine Control Unit
SQ6M Engine Control Unit
SQ6M12 Engine Control Unit
MQ12 Engine Control Unit
MQ12Di Engine Control Unit
Apr 4th, 2018



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
PE3-8400 Engine Control Unit
PE3-8405 Engine Control Unit
PE3-SP000 Engine Control Unit
Mar 9th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
RZR XP 900
RZR XP 1000
RZR XP Turbo
Apr 20th, 2018
see App Notes
see App Notes



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
Pro128 Engine Control Unit
Pro112 Engine Control Unit
Pro48 Engine Control Unit
May 23rd, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
8P Keypad, 8 Position Motorsports CAN Keypad
Mar 21st, 2017
15P Keypad, 15 Position Motorsports CAN Keypad
Mar 21st, 2017
TC8, 8 Channel Thermocouple Module
Dec 15th, 2016



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
V300 Data Loggers
V300SD Data Loggers
V500 Data Loggers
V500SD Data Loggers
Sportsman Data Loggers
G2X Data Loggers
G2X Pro Data Loggers
Mar 7th, 2017
V-Net Air Temp sensor modules
Mar 7th, 2017
V-Net Exhaust Temp sensor modules
Mar 7th, 2017
V-Net IR Brake Temp sensor modules
Mar 7th, 2017
V-Net IR Tire Temp sensor modules
Mar 7th, 2017
V-Net Laser Ride Height sensor modules
Mar 7th, 2017
V-Net Oil/Trans/Diff Temp sensor modules
Mar 7th, 2017
V-Net Pressure sensor modules
Mar 7th, 2017
V-Net Thermocouple sensor modules
Mar 7th, 2017
V-Net USM - 4 Ch Analog Universal sensor module
Mar 7th, 2017
V-Net Water Temp sensor modules
Mar 7th, 2017
V-Net Wheelie Bar Force sensor modules
Mar 7th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
Delta 400 Engine Control Units
Delta 800 Engine Control Units
Delta 880 Engine Control Units
Apr 4th, 2018
Delta GDi4 Direct Injection Engine Control Unit
May 4th, 2018
Delta SDi4 Common Rail Diesel Engine Control Unit
Apr 4th, 2018



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
TPMS Lite Tire Pressure Monitoring Systems
TPMS Pro Tire Pressure Monitoring Systems
Feb 28th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
S6 Engine Control Units
S6+ Engine Control Units
S6I Engine Control Units
S8 Engine Control Units
S12 Engine Control Units
SDI Engine Control Units
Mar 14th, 2017
PDU10, 10 Channel Power Distribution Unit
Jan 9th, 2017
PDU16, 16 Channel Power Distribution Unit
Jan 9th, 2017
PDU32, 32 Channel Power Distribution Unit
Jan 9th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
AP-1, 16 Channel Aero Pressure Sensor Array
Jan 9th, 2017
AC-1-4, 4 Channel Analog Expansion Module
Jan 9th, 2017
IR-1, Non-Contact IR Tire Temperature Sensor Module
Jan 9th, 2017
SG-1-C, Strain Gauge Amplifier Module
Jan 9th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
IRN4C, 4-Ch IR Tire Temp Sensor
Jan 10th, 2017
IRN8C, 8-Ch IR Tire Temp Sensor
Jan 10th, 2017
THN4x, 4-Ch Thermocouple Amplifier
Jan 10th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
i44 Engine Control Units
i88 Engine Control Units
Jul 10th, 2017



Product
Source
Update Date
App Notes
Configurations
PnP Harness
Sample Layout
Zt-3 CAN Wideband Lambda Meter
Aug 3rd, 2018


All product names, logos, and brands are property of their respective owners. All company, product, service names and logos used are for identification purposes only. Use of these names, logos, and brands does not imply endorsement.

Firecracker
Offline
Last seen: 1 year 4 months ago
Joined: 01/23/2017 - 09:05
FUELTECH FT400 ?

FUELTECH FT400 ?

AEM_JR
AEM_JR's picture
Offline
Last seen: 13 hours 11 min ago
Joined: 05/26/2014 - 00:08
[quote=Firecracker]

Quote:
FUELTECH FT400 ?

I have been in contact with the guys over at FuelTech and I think I have what I need to understand the formats. Unfortunately, it will require custom software to support. Do you have an FT400 already and are looking for a dash or are you looking to see whats coming down the pipeline as info on a possible future purchase?

kevin mccarthy
Offline
Last seen: 1 year 6 months ago
Joined: 02/02/2017 - 15:34
 

 

Hi are there plans to add Pectel EQ10 ecu to your third party list please?

 

 

 

AEM_JR
AEM_JR's picture
Offline
Last seen: 13 hours 11 min ago
Joined: 05/26/2014 - 00:08
[quote=kevin mccarthy]

Quote:
Hi are there plans to add Pectel EQ10 ecu to your third party list please?

I have Pectel on the list but I had not yet detailed which ECU's would be supported. Just have to devote a little bit of time to sort it all out. John

jchidley
Offline
Last seen: 1 year 6 months ago
Joined: 02/04/2017 - 21:33
how does this interface with

how does this interface with GM LS crate engine and ECUs?

AEM_JR
AEM_JR's picture
Offline
Last seen: 13 hours 11 min ago
Joined: 05/26/2014 - 00:08
Since the CAN bus is fully

Since the CAN bus is fully programmable it can be made to work with the GM LAN. However, I dont currently have the definition for that network and while I have seen it scattered around the web I have not made ca concerted effort to track it down and codify it into a DBC file. There are lots of forums that do specifically work with GM LAN and they would be a good place to start. If you know what is on the bus, you are fully enabled to make the CD-7 recognize it.

***** EDIT *****
Support for the GM MEFI-4b ECU P/N 12584052 has been added.
This is a popular ECU used on many GM Crate engines and Marine engines

abdo28
Offline
Last seen: 10 hours 18 min ago
Joined: 11/14/2014 - 15:16
Hi do you have bdc file for

Hi do you have bdc file for racepack smartwire pdm to communicate with CD-7

AEM_JR
AEM_JR's picture
Offline
Last seen: 13 hours 11 min ago
Joined: 05/26/2014 - 00:08
We don't have the Smartwire

We don't have the Smartwire config file yet but it is on the shortlist and as soon as I can secure one for testing we can complete it. Do you already have one? If you do and are willing to part with it for a week or two I can do all the validation and give you a deal on a CD-7 for your troubles.

AEM_JR
AEM_JR's picture
Offline
Last seen: 13 hours 11 min ago
Joined: 05/26/2014 - 00:08
How do you have the sensors

How do you have the sensors connected to the ECU? Also, which pressure sensors are you using?

ALG Autos
Offline
Last seen: 1 month 2 weeks ago
Joined: 05/23/2017 - 14:40
Hi JR,

Hi JR,

Yes I have 2 sensores for the brake pressure, one front and the other rear.  Im using 2000 PSI sensor.  they are connected to the Haltech Elite ECU in the Front Brake and Rear Brake Option.

and transmiting by CAN to the CD7L dash.

The problem is that there is only one brake pressure on the CAN String for Elite.

Regards and waiting for your comments

ALG Autos
Offline
Last seen: 1 month 2 weeks ago
Joined: 05/23/2017 - 14:40
ALG Autos wrote:

ALG Autos wrote:

Hi JR,

Yes I have 2 sensores for the brake pressure, one front and the other rear.  Im using 2000 PSI sensor.  they are connected to the Haltech Elite ECU in the Front Brake and Rear Brake Option.

and transmiting by CAN to the CD7L dash.

The problem is that there is only one brake pressure on the CAN String for Elite.

Regards and waiting for your comments

attached Picture of the option.

 

Regards

ALG Autos
Offline
Last seen: 1 month 2 weeks ago
Joined: 05/23/2017 - 14:40
ALG Autos wrote:

ALG Autos wrote:

Hi JR,

Yes I have 2 sensores for the brake pressure, one front and the other rear.  Im using 2000 PSI sensor.  they are connected to the Haltech Elite ECU in the Front Brake and Rear Brake Option.

and transmiting by CAN to the CD7L dash.

The problem is that there is only one brake pressure on the CAN String for Elite.

Regards and waiting for your comments

 

any Ideas?

 

Regards

AEM_NS
Offline
Last seen: 1 month 3 weeks ago
Joined: 06/06/2014 - 09:31
You say you only have one

You say you only have one brake pressure channel but you have setup two. What is other channel being input as? You will likely have to pick some other pressure channel that is already on the CAN string but isn't already being used in the system and then use it for your second brake pressure.

joao.pensa
Offline
Last seen: 7 months 1 week ago
Joined: 01/08/2018 - 19:37
Does it work with ProTune

Does it work with ProTune PR440 ?

AEM_NS
Offline
Last seen: 1 month 3 weeks ago
Joined: 06/06/2014 - 09:31
The CD dash will work with

The CD dash will work with any CAN 2.0 transmit device so long as you can either manually configure the CAN receive setup or import a DBC file. If ProTune can supply you with a DBC then it'd be very easy to setup assuming they follow standard protocol.

AEM_JR
AEM_JR's picture
Offline
Last seen: 13 hours 11 min ago
Joined: 05/26/2014 - 00:08
FYI, The Cosworth/Pectel

FYI, We have just added a bunch more ECU's to the dash line!

The Cosworth/Pectel "Omega" datastream has been added. Most if not all of the Pectel ECU's support this as a CAN output format.
SQ6 Engine Control Unit
SQ6M Engine Control Unit
SQ6M12 Engine Control Unit
MQ12 Engine Control Unit
MQ12Di Engine Control Unit

We have added the Specialist Control Systems Delta line of ECU's, including their GDI and common rail Diesel ECUs
Delta 400 Engine Control Unit
Delta 800 Engine Control Unit
Delta 880 Engine Control Unit
Delta GDi4 Engine Control Unit
Delta SDi4 Common Rail Diesel ECU

The EMS EM-Tech line of ECU's
EM-Tech EM70 Engine Control Unit
EM-Tech EM80 Engine Control Unit
EM-Tech EM140 Engine Control Unit
EM-Tech EM160 Engine Control Unit
EM-Tech EM180 Engine Control Unit

The MaxxECU line of ECU's
MaxxECU Street Engine Control Unit
MaxxECU Sport Engine Control Unit
MaxxECU Race Engine Control Unit
MaxxECU Pro Engine Control Unit

abdo28
Offline
Last seen: 10 hours 18 min ago
Joined: 11/14/2014 - 15:16
is there any config for

is there any config for racepack smart wire pdm

AEM_JR
AEM_JR's picture
Offline
Last seen: 13 hours 11 min ago
Joined: 05/26/2014 - 00:08
[quote=abdo28]

[quote=abdo28]

is there any config for racepack smart wire pdm

[/quote]

Not yet, but that's mainly because I haven't put my hands on one yet to do the mapping. Once I have one in house I will add it's configuration to the list.

AEM_JR
AEM_JR's picture
Offline
Last seen: 13 hours 11 min ago
Joined: 05/26/2014 - 00:08
Added CAN configs, Layouts

Added CAN configs, Layouts and Instructions for both the Megasquirt Simplified Dash protocol (20 channels) and the Megasquirt Advanced Realtime Broadcast protocol (364 channels!).

Applies to:
MS3-Pro
Megasquirt-3
Megasquirt-2
Microsquirt
MSPNP Gen2
MS3ProPNP

Hurski77
Offline
Last seen: 2 months 1 week ago
Joined: 06/11/2018 - 01:23
Hello,

Hello,

I have EFI Technology EURO-4 ecu and I have hard time to build CAN Configurations fron scratch. Can you help me?

AEM_JR
AEM_JR's picture
Offline
Last seen: 13 hours 11 min ago
Joined: 05/26/2014 - 00:08
Yes, send me whatever info

Yes, send me whatever info you have regarding the CAN data the dash is sending out and I will see what I can work up.

Send it to:
CANBusInfo@AEMPower.com

john

EDIT : Added EFI Technology Srl Euro-4 Config

AEM_JR
AEM_JR's picture
Offline
Last seen: 13 hours 11 min ago
Joined: 05/26/2014 - 00:08
Changed the Link Lambda CAN

Changed the Link Lambda CAN module to AEM Tested!

ALG Autos
Offline
Last seen: 1 month 2 weeks ago
Joined: 05/23/2017 - 14:40
Hello,

Hello,

GEMS? 

 

regards

 

ANDY

 

AEM_JR
AEM_JR's picture
Offline
Last seen: 13 hours 11 min ago
Joined: 05/26/2014 - 00:08
The dash will work well with

The dash will work well with GEMS products, the reason we don't have a setup for one is that GEMS allows full user control over it's CAN outputs so we don't have a default data configuration to package one off of.

If you have a CAN output defined or if you have one that they commonly use then send me the info and I can do a CAN setup for it. Alternately you can send me your cal file and your GIN file and I can probably extract it from there as well.

Send it to CANBusInfo@AEMPower.com and I will take a look at it.

John

highhplowiq
Offline
Last seen: 1 week 4 days ago
Joined: 07/13/2018 - 11:05
Mast Motorsports M90 ECM? 

Mast Motorsports M90 ECM?  Mast tells me that anything that uses J1939 will interface with their system.  Thanks

AEM_JR
AEM_JR's picture
Offline
Last seen: 13 hours 11 min ago
Joined: 05/26/2014 - 00:08
Sorry for the delay, Call our

Sorry for the delay, Call our tech support line. We have an unreleased setup that is being tested for that application and they can set you up with it.

highhplowiq
Offline
Last seen: 1 week 4 days ago
Joined: 07/13/2018 - 11:05
AEM_JR wrote:

AEM_JR wrote:

Sorry for the delay, Call our tech support line. We have an unreleased setup that is being tested for that application and they can set you up with it.

yes

AEM_JR
AEM_JR's picture
Offline
Last seen: 13 hours 11 min ago
Joined: 05/26/2014 - 00:08
Added Haltech Elite VMS and

Added Haltech Elite VMS and Elite VMS-T Vehicle Management Systems as Confirmed

AEM_JR
AEM_JR's picture
Offline
Last seen: 13 hours 11 min ago
Joined: 05/26/2014 - 00:08
Added Zeitronix Zt-3 CAN

Added Zeitronix Zt-3 CAN support as Confirmed

AEM_JR
AEM_JR's picture
Offline
Last seen: 13 hours 11 min ago
Joined: 05/26/2014 - 00:08
Added support for Mast

Added support for Mast Motorsports M90 and M120 ECU's