Plug & Play Fuel and Ignition Controller for 4 Cylinder Race Motorcycle Applications
The AEM Plug & Play Powersport piggyback Fuel and Ignition Controller (F/IC). This kit combines the power and drivability of the F/IC with a plug and play harness, start up calibration, and “quick start guide” for fast, easy installation and simplified tuning.
Legal in California only for racing vehicles which may never be used upon a highway.
NEW AEM INSTRUCTIONAL & INFORMATION VIDEOS
PLUG & PLAY F/IC KEY FEATURES
Water & Shock resistant enclosure
Plugs directly into the factory harness. No rewiring necessary.
Includes start up calibrations.
Calibratable MAP Output.
Runs in conjunction with factory ECU. CAN-BUS not affected.
Among the only piggyback systems which can decrease pulse-width, allowing larger aftermarket injectors while maintaining proper air/fuel ratios.
2 Mb of internal data logging.
F/IC OVERVIEW
The AEM F/IC is an economical solution for controlling fuel and ignition on motorcycles that do not require stand-alone engine management. The F/IC gives users with race motorcycles and non-factory forced induction systems the ability to retard ignition and deliver accurate amounts of fuel without the need for outdated FMUs or “boost hiding” controllers. This system works parallel to the factory ECU preventing tuning limitations due to complex factory timing patterns. 21x17 maps with configurable load and RPM breakpoints are easily accessed with the F/IC's Windows-based tuning software. The F/IC draws power from PC USB interface for quick and easy calibration changes.
PRECISE FUEL DELIVERY
The F/IC intercepts the signal to the stock injectors, allowing the user to modify pulse-width by +/-100%. The F/IC is among the only piggy-back systems that can decrease injector pulse-width, allowing the user to drive larger aftermarket injectors* while still maintaining proper air / fuel ratios. This powerful system can also tap into the factory injector signal and work independently to drive up to four (4) additional injectors.
TIMING RETARD CONTROL
The F/IC can retard timing from the factory system based on engine RPM and load inputs. This is achieved by intercepting and delaying the outputs from the cam and crank position sensors to the engine.
SENSOR CALIBRATION & CONTROL
The F/IC can also be used to recalibrate / clamp the MAP sensor, eliminating common problems with non-boosted factory MAPs. The on-board MAP sensor allows for proper fueling in boosted conditions.
CAN-BUS SYSTEMS NOT AFFECTED
Since the F/IC works in conjunction with the factory ECU, late model-motorcycles equipped with a CAN-BUS system retain functionality of the dash and other components on the network.
F/IC-4 FEATURES
FEATURES
Powersport F/IC-4
Injector Channels
4
Advanced Injector Load Simulation & Filtering
Yes
Timing Channels (Cam + Crank)
2
High/Low Voltage Selectable MAG-Driver Outputs
Yes
TPS Input
Optional*
MAP Sensor (Onboard)
Yes
External AFR Input
Optional*
PC Datalogging
Yes
Internal Logging Memory
2mb
*TPS Input can be used as either TPS Input or Wideband Analog Input
