OVERVIEW
This install kit includes an AEM high performance stainless steel 100psig pressure sensor (Part#30-2130-100), stainless steel standoff tube and stainless steel braided hose and fittings designed for use with the AEM 4-Channel Wideband UEGO Controller. The kit is specifically designed to give accurate back pressure readings without sacrificing sensor longevity due to extreme operating conditions.
KEY FEATURES
- AEM High Performance Stainless Steel 100psig Sensor
- Stainless Steel standoff tube with fittings, braided hose and weld-on/threaded bung
- Designed to provide accurate pressure readings without sacrificing sensor longevity
- Includes all necessary hardware for ease of installation
EXHAUST BACK PRESSURE INSTALL KIT
 
 
100psig Sensor Performance Specifications(Part#30-2130-100):
Accuracy: +/- 0.5% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity
Operating Temp: -40C to 105C / -40F to 221F
Burst Pressure: 1000PSI
Response Time: < 1mS
Wetted Materials: 304L & 316L Stainless Steel
Vibration: 100 to 2000Hz, 20g Sinusoidal, 3 Axes
Weight: <85g
Supply Current: <6mA at 5 Vdc
Output: .5 to 4.5Vdc Linear
Transfer Function: PSI = (25*(Voltage))-12.5
Elec. Termination: Integral weatherproof connector, includes mating connector with 12" leads, 1 Red (Supply Voltage 5Vdc +/- .5), 1 Black (Ground), 1 Green (Output)
| 
