S2 Calibration Requests: please ask for maps in THIS THREAD ONLY | Page 6 | AEM
244 posts / 0 new
Last post
Dc2 stoned
Offline
Last seen: 3 years 3 weeks ago
Joined: 10/03/2017 - 23:30
aem 60-40 v2 ems using obd2a

aem 30-6040 v2 ems using obd2a to obd1 jumper harness

99 acura integra 1.8l stock block and head b18c1

18g greddy turbo kit with front mount intercooler

3" exhaust 

aem uego wideband x series

skunk2 version 1 intake manifold

evoVIII 560cc 4 hole injectors with resistor box 

stock map sensor

stock fuel pump, regulator and fuel rail

stock distributor

need start up calibration please

Juniorjosh
Offline
Last seen: 2 years 3 months ago
Joined: 09/28/2017 - 20:01
AEM EMS v2 30-6620

AEM EMS v2 30-6620

1990 300zx JDM M/T

VG30DETT

GT28RS

Stock Block

WinFactory with EV14 "870CC" injectors

AEM Wideband

AEM Failsafe

3" True Dual Exhaust With O2 in each Bank

AEM 3.5 Bar 30-2130-50

AEM IAT Sensor

AEM Oil Pressure to pin 37

 

Start up Cal, Thanks in advance

Junior_josh650 @ hotmail.com

Afigueroa95620
Offline
Last seen: 2 years 6 months ago
Joined: 10/12/2017 - 17:42
30-6100

30-6100

1995 Toyota supra turbo

550cc injectors (stock), BC h beam rods

AEM 325lph fuel pump

GSC s1 cams, JE pistons, 

Precision 6766 turbo. , AEM 3.5 bar MAP sensor , 93 octane fuel

Tech2uned
Offline
Last seen: 3 years 1 week ago
Joined: 10/16/2017 - 15:13
s2slo wrote:

s2slo wrote:

AEM Series 2 30-6052

2001 Honda S2000

F20C Stock

Stock 340cc injectors

91/93 Octane, stock fuel pump

Stock map sensor

Modifications:

K&N Drop-in Air filter

Header back Berk 3" Single Exhaust (No Catalytic Converter)

Need Calibration Please.

 

Pretty much same mods as this. Taking off SC and don't have my original tune. Thank you guys.

Bgarceau
Offline
Last seen: 3 years 5 days ago
Joined: 10/23/2017 - 06:54
Customer Car from another

Customer Car from another shop:

AEM Series 2 serial number: 6040-0001

92 Honda Accord F22A1

EVO 8 560cc injectors

I assume EBAY turbo kit (no specs)

Lower compression pistons (again no specs)

Stock Intake Manifold

Stock Fuel Pump

Stock MAP sensor

Need a base calibration (tuner from years ago locked system & did a poor job calibrating)

Thank you

John-Raynor
Offline
Last seen: 3 years 22 hours ago
Joined: 10/31/2017 - 03:53
Has anyone got a base map for

Has anyone got a base map for a standard Honda S2000 and also a Honda S2000 with the HKS supercharger/fuel kit fitted.

Thanks

John ( johnraynor500@gmail.com )

sc300hp
Offline
Last seen: 2 years 12 months ago
Joined: 11/05/2017 - 08:52
Need a start up map for

Need a start up map for

30-6100 V2

AEM 3.5 bar map sensor

AEM AIT sensor

AEM wideband failsafe

2jzge head Na-T set up, 

264 bc cams

T6262 turbo

2jzge headgasket

1000CC ID injectors

2jzgte bottom end

Walbro 450 LPH

R154 manual transmission

 

GT30RUDE
Offline
Last seen: 2 years 11 months ago
Joined: 05/11/2016 - 10:01
Good morning does anyone have

Good morning does anyone have a startup  for 

30-6050 v2

aem 2 bar map sensor

aem ait sensor

is300 stock harness

with dezod plug and play harness

stock 1jz vvti gte

stock 370 injectors

walbro 450 lph

stock fuel system

front mount intercooler

3inch exhaust

email:rudebwoy608@gmail.com

y0bam
Offline
Last seen: 2 years 11 months ago
Joined: 11/10/2017 - 17:54
Does anyone have a start up

Does anyone have a start up for 

30-6060 v2

750cc/min Gram Injectors

12.5:1 Compression

stock map sensor

stock fuel pump, regulator and fuel rail

stock distributor

Skunk 2 70mm Intake Manifold & Throttle Body

2.25" Full Exhaust System

Would greatly appreciate a start up calibration for any B18, N/A preferred. 

billaa49@gmail.com

Thanks,

-Will

RiseVTEC
Offline
Last seen: 2 years 10 months ago
Joined: 12/11/2017 - 16:24
Looking for a basemap to

Looking for a basemap to start my car and take it to the tuner. Preferably set the basemap with the coils activated. thank you for your help!

 

EMS V2 6050 (with obd2a to obd2b harness)

98 Civic DX 

84x87.2 B18C 12.7:1 C/R 

4piston CnC head with TODA B cams

ATI Race damper

Bosch ID 1000cc

E85

stock sensors. 

EPM COP, 4 channel coil drive

Skunk2 ultra street / 74mm tb.

 

 

Rizz
Offline
Last seen: 11 months 1 week ago
Joined: 12/14/2017 - 10:10
Hi I want calibration file of

AEM EMS2 30-6040 on 1jzgte

Hi I want calibration file of AEM EMS2 30-6040 (honda) which I am running through patch harness on my 1JZGTE- Non vvti, single turbo hx45, 340cc injectors, stock map sensor , front mount intercooler 3 inch downpiping , total stock internals. 

I am facing the problem that it is unable to get the crank signals.

Kindly help.

MRK

rafastary1414
Offline
Last seen: 2 years 9 months ago
Joined: 12/15/2017 - 13:13
Honda Accord Type R (H22a7)

Honda Accord Type R (H22a7)

EMS 2 30-6050

DW injectores 550cc (22S-01-0550-4)

OEM Map sensor

98 octane fuel
AEM true time cam  gears

70mm butterfly

Ported headers

Full 3" ehxaust
 

Thanks in advance!

venom
Offline
Last seen: 2 years 9 months ago
Joined: 12/21/2017 - 14:01
Startup calibrations for 2002

Startup calibrations for 2002 S2000 AP1

AEM Series 2

Stock engine

Stock Header 

High Flow Cat with Invidia q300 exhuast 

Stock fuel pump and injectors 

K&N cold air

 

Csmith1989
Offline
Last seen: 2 years 2 months ago
Joined: 12/31/2017 - 16:30
30-6050 ems 1990 Toyota Supra

30-6050 ems 1990 Toyota Supra nat t61 with rc550cc, gm 3 bar map 12223861, gm iat, 7m 3.0l engine stock bore, 93 octane, aem wideband 30-4110 7mgte cps 7mgte coils walbro 255 fuel pump

 

 

900hpcrx
Offline
Last seen: 2 years 9 months ago
Joined: 01/09/2018 - 20:36
30-6040 ems.

30-6040 ems.
1990 Honda crx
Gsr 2.0l with b16 head
Skunk 2 pro 2 cams VTEC locked
T1 trigger coil on plug
Grams 1600cc injectors 8 injectors staged
E85
Aem 5bar map
6785 turbo

Just need a start up map to check everything

z3zinho
Offline
Last seen: 2 years 9 months ago
Joined: 01/15/2018 - 15:46
Hi,

Hi,

I can't find any startup calibrations for stock RB25DET/CA18DET.

I was expecting to see more base calibrations, and I suspect that maybe in previous AEMTuner versions they were there as all my calibrations are in .

I have no calibrations in C:\ProgramData\AEMTuner\Calibrations , but ther is an extra folder \AEM Updates. Nothing for stock RB25DET/CA18DET though.

Thanks

José C,

 

 

AEM_NS
Offline
Last seen: 11 hours 46 min ago
Joined: 06/06/2014 - 09:31
You don't see this in the

You don't see this in the Nissan folder?

There's not much need to have so many different base cals when the cals can easily be configured for any type of engine setup.  

z3zinho
Offline
Last seen: 2 years 9 months ago
Joined: 01/15/2018 - 15:46
Thanks for the quick reply,

Thanks for the quick reply,

So for a CA18DET should I just pick an SR20DET as starting point?

AEM_NS
Offline
Last seen: 11 hours 46 min ago
Joined: 06/06/2014 - 09:31
Yes, that should work. Be

Yes, that should work. Be aware of the requirement to run the AEM CAS wheel though.

PatrickS2K
Offline
Last seen: 4 months 2 days ago
Joined: 01/29/2018 - 04:31
hello

hello

searching for a startup calibration to drive to my tuner.

Honda S2000 ap1 from 2003 w/o idle controll valve

Infinity 506 with pnp harness

F20c

50mm ITB setup w/o idle controll valve

cold air airbox

Stock injectors 340cc ( i had also 410cc)

Stock sensors

Stock fuel pump

Skunk2 stage 2 cams

Skunks 2 header

CP pistons 11,8:1

Invidia Q300 catback

hjs highflow cat

with the infinity basemap the car has not a cold start and run toooo rich  AFR from 9

hope somebody can help me :)

greating from Germany

Patrick

iw2t
Offline
Last seen: 2 years 9 months ago
Joined: 01/29/2018 - 06:42
EMS Series 2 Serial# 6052

EMS Series 2 Serial# 6052-1888

2002 S2000 F20C engine 2.0, NA, ID 1050cc injectors, walbro 255 pump, stock rails, stock sensors on 91 pump gas 

Intake with full exhuaust, not cats

fridaytech
Offline
Last seen: 2 years 9 months ago
Joined: 01/31/2018 - 16:11
Ems Series 2  30-6600

Ems Series 2  30-6600

1992 nissa sentra ser

motor SR20VET all orginal

Coil on plug with aem GTIR CAS disk

S15 coil packs

Id1000 injectors. CA91 octane

Aem 3.5 bar map sensor

Aem iat sensor

 
MarcusDubya77
Offline
Last seen: 10 months 3 weeks ago
Joined: 02/20/2018 - 12:44
AEM 30-6052U Series 2

AEM 30-6052U Series 2

AEM 30-4110 UEGO

2005 Honda S2000

 2.2 L

Pico 480CC injectors 

91 Octane

Hayward/ Jenvy 50mm ITBs

Mugen Header

63.5mm HFC

Fujitsubo Legalis R exhaust

 

stayfrost-e
Offline
Last seen: 2 years 7 months ago
Joined: 03/17/2018 - 15:58
Does anyone have Calibration

Does anyone have Calibration File for a 94 NSX. 

I bought a AEM EMS and it does not have the NSX Calibration files on it. 

Thank you.

 

stayfrost-e
Offline
Last seen: 2 years 7 months ago
Joined: 03/17/2018 - 15:58
stayfrost-e wrote:

stayfrost-e wrote:

Does anyone have Calibration File for a 94 NSX. 

I bought a AEM EMS and it does not have the NSX Calibration files on it. 

Thank you.

 

 

Thought i should clarify here its a V2 

LasseV
Offline
Last seen: 2 years 6 months ago
Joined: 03/23/2018 - 05:13
Hi! Looking for a basemap to

Hi! Looking for a basemap to start my car and take it to the tuner.

30-6101 - Series 2 Plug & Play EMS. TOYOTA: 93-97 Supra Non-Turbo

​Car is 1994 JDM Supra.

ITB setup 45mm without idle control valve

​Standard MAF

​330cc standard injectors

BC 264 cams

MVP style performance headers 1st cat delete

​HKS dragger cat-back

​AEM UEGO wideband AFR 

98 oct fuel

​Thanks!

 

scar762
Offline
Last seen: 2 years 6 months ago
Joined: 03/25/2018 - 14:47
51-0439, Motor is out of a

51-0439, Motor is out of a 2003 Acura TL type S (J32A2) but in a 1975 Austin Mini Cooper 1275 GT, 3.2L, Flow rate is factory, Fuel is 91 octane, MAP is factory

We have a start up calibration but we are looking for a more performance minded one. .. thanks in advance 

 

custom tactics
Offline
Last seen: 2 years 6 months ago
Joined: 04/04/2018 - 11:34
05 s2000. ap2 2.2l.

05 s2000. ap2 2.2l.

k&n

test pipe

aftermarket mufflers

aem fuel rail

aftermarket fuel pressure regulator.

just learning the system ans so far i love it. thanks

Beechan215
Offline
Last seen: 1 year 11 months ago
Joined: 04/05/2018 - 17:31
02 s2000

02 s2000
50 trim turbonetics turbo
800cc deatschwork injectors
340 deatschwork fuel pump
Stock map sensor
Stock motor
Full 2.5" exhaust

Mr. Rogers
Offline
Last seen: 2 years 5 months ago
Joined: 04/10/2018 - 02:38
2005 S2000 2.2L (series 2 30

2005 S2000 2.2L (series 2 30-6052)

Kraftwerks c38-91 Supercharger Kit (14psi), Skunk2 4 bar map sensor, Walbro 450 pump, deatschwerks 1300cc injectors, aem fuel rail, aem regulator, running E85

Skunk2 Header, 70mm test pipe, 75mm Exhaust

Pages