S1 Calibration Requests: please ask for maps in THIS THREAD ONLY | Page 3 | AEM
108 posts / 0 new
Last post
Awally2
Offline
Last seen: 3 years 8 months ago
Joined: 01/09/2017 - 00:38
I need a base MAP please. My

I need a base MAP please. My vehicle is a 1997 Acura integra. I have a JDM B18C type R. It has Skunk2 tuner series stage 1 camshafts, Skunk2 alpha series: Header, intake manifold, 66mm throttle body, adjustable cam sprockets, all Skunk2. AEM COP kit, AEM high flow fuel pump, rail, regulator and fuel filter. I mostly would like a stock MAP for this engine but would love to have a custom map.  Need a good starting point for me to street tune please  

 

 

engine_runner
Offline
Last seen: 2 years 1 week ago
Joined: 03/25/2017 - 05:34
1991 honda crx with a d16z6

1991 honda crx with a d16z6 motor with p29 pistons, cometic head gasket 0.075",  jackson racing supercharger, rdx 410cc injectors, stock camshaft, headers, intake, adjustable fuel pressure regulator, walbro 255liter fuel pump , compression ratio of 10.97:1, using 30-1080 ems, 30-4900 uego, 30-3001 water/meth kit.

Boostedsupra2017
Offline
Last seen: 3 years 7 months ago
Joined: 04/02/2017 - 22:23
 

 

Please help with a calibration or base map for 2jzgte non vvti

stock injectors t4 gt40 turbo single 44mm wastegate 450lph fuel pump manual transmission 

 

You can email me richboost@icloud.com

s2k_raven
Offline
Last seen: 3 years 7 months ago
Joined: 04/04/2017 - 17:16
Dodn't know if this thread is

Dodn't know if this thread is still active, but I am looking for a Map/Calibration for a 2002 Honda S2000, 30-1052 AEM.

Stock Engine bored .25 over,

Short Ram Intake

Catback Exhaust

Factory Injectors and fuel pump (93 octane), all stock sensors.

Currently running on the base calibration that comes on the software download which makes the car run good, but too rich. Consumes fuel excessively. Looking for a balanced tune. Car is a weekend driver, not track or street racer.

AEM_NS
Offline
Last seen: 3 weeks 4 days ago
Joined: 06/06/2014 - 09:31
Sorry but I think there's a

Sorry but I think there's a misunderstanding on how this works. AEM does not offer any kind of cal creation service. The base cals we provide are simply a starting point to get an engine to start and run - anything beyond that needs to be handled by an experienced tuning professional.  This thread is simply a place for user to request cals - there's no guarantee that you'll actually get one.  It's not likely that many would be willing to share a cal that they paid hundreds of dollars to have professionally tuned with someone else for free.  

Long story short, hire a qualified tuner.  

540mirra
Offline
Last seen: 3 years 7 months ago
Joined: 04/16/2017 - 17:58
Hi.

Hi.

 

I need a cal file for my aem series 1 on my supra 2jzgte.

stock block and top

 

264 cams

injector dynamics 1000cc

borg warner s366

twin turbosmart wastegate

stock coils

43psi fuel pressure

AEM iat sensor

3,5bar map sensor and 5bar (need a map for both)

 

electronic boostcontroller is integrated in my innovate scg-1 afr

 

please send file to kristoffer.braathen@hotmail.com

 

 

 

 

 

ems1mc
Offline
Last seen: 3 years 6 months ago
Joined: 03/27/2017 - 09:16
I also need this same file.

I also need this same file.

turb0g33k wrote:

Posting again.

(30-1100) calibration wanted

(SC300)

2JZ-GE NA-T

GTE headgasket

(Otherwise stock internals)

550cc injectors

T4 A/R .70 (gt35 equivelant?) turbo

7M CPS w VVTi coil packs.

 

basically something along these lines would seriously help.

 

Bport13
Offline
Last seen: 3 years 6 months ago
Joined: 05/02/2017 - 02:40
Hello I am looking for a

Hello I am looking for a calibration for my series 1 it's a 30-1320 Evo 9 (4g63) list of mods are 1000cc ultimate racing injectors,cop kit Toyota coils, 20g with a 11 blade billet wheel on 25 pounds of boost. Walbro 255, injen intercooler pipes , Stock MAF ,open dump o2 housing, invidia exhaust manifold, hks ssqv bov, full hks exhaust no cats, injen intake pipe. Extras is halmen Boost controller , stage 2 act puck clutch, 5-speed swap. Any help would be greatly appreciated. Where I'm located to even get a base tune I have to travel 2-3 hours I plan on getting a full tune eventually just don't have that kinda time right now 

 

 

 

 

bdpm357
Offline
Last seen: 3 years 6 months ago
Joined: 05/11/2017 - 15:47
need base map for 1040u 95

need base map for 30-1040u v1 95 accord f22b jdm stock everything except header and cold air intake

Adamgilbert2010@gmail.com

GorillaRE
Offline
Last seen: 3 years 6 months ago
Joined: 05/24/2017 - 10:09
Does anone ave anyything

Does anone have anything close to a start-up map for the below?

1052-0080 V1 EMS, 2001 Honda s2000, 2.0L (sleeved 9.0:1 comp, gt35r, fmic, 3" exhaust), ID1050X injectors, 93oct pump gas, SSI technologies (P51-75A-B-P18-4.5v) 5bar MAP sensor

Thank you in advance. 

Doege14561
Offline
Last seen: 3 years 4 months ago
Joined: 07/07/2017 - 23:15
I need a base map for 1.6

I need a base map for 1.6 Miata rx7 red top injectors (550's), garret t25, stock maf.

syko
Offline
Last seen: 3 years 3 months ago
Joined: 01/08/2015 - 06:10
hi, not been on here for a

hi, not been on here for a long time still got my 300z 1990 z32 tt

could do with a map thats close dont mind paying either the engine spec

forged piston/ wiseco / arp bolts set/ acl bearings etc

740 cc tomei injectors

jwt sports 650 turbos

ams exhaust manifolds with split downpipes 3"

jwt cams and valve springs

upgraded vv timing inlet pulleys

ash spec inter coolers with pipe work

aem series 1 ecu with dual wideband sensors part no 30-2300  /w0#3851 running current version 3.23r9 on lappy

aem 3.5bar map sensor 

boost currently controlled by blitz sbc id  but i have a gm boost solenoid if you have a boost map

 regards richard

 

98blackgsr
Offline
Last seen: 3 years 2 months ago
Joined: 09/09/2017 - 10:03
AEM EMS V1, 1998 acura

AEM EMS V1, 1998 acura integra,2.0 liter (stock k20a2 with bolt ons), Injector Dynamics 1000cc injectors, E85, stock map sensor. I would like a basemap for my k20a2, its stock internals with 1320 big tube header, skunk2 ultra street manifold, 74mm throttle body, k-tuned fuel rail, ID1000cc injectors, aeromotive fpr, walbro 450 fuel pump, -6 an feed and return line, k-tuned ac/ps delete. If you need anymore information please let me know, Im in need of a basemap so i can get my car to my dyno tuner. Thank you!

 

Mace2jz
Offline
Last seen: 3 years 2 weeks ago
Joined: 09/24/2017 - 07:04
Aems ems v1,

Aems ems v1,
Supra -95,
single turbo,
1300cc injectors,
Hks Dli,
Twin walbros fuel pumps,
Built motor,
3bar map,
running with re85

I'm having trouble with engine start. Needs meny cranks and help with throttle. When engine is warm, it starts quite easy, but when coolant temp is cold (10-20 °C) its difficult.
Any help?
markus.vainio@hotmail.com

james d wagner
Offline
Last seen: 3 years 1 month ago
Joined: 10/13/2017 - 18:49
AEM EMS 30-1300 1994

AEM EMS 30-1300 1994 mitsubishi eclipse gst 4g63t pump gas 91 octane stock Mass Airflow Sensor 450cc injectors (looking for bass map for initial setup)

Bori28209
Offline
Last seen: 2 years 11 months ago
Joined: 12/14/2017 - 17:53
Hi, need a startup tune for:

Hi, need a startup tune for:

aem v1 (serial# 1060-0028) 2000 civic ex (d17 block and d16y8 head), stock injectors, 91 octane gas and stock map.

Thanks i apprecite help  

Melfice_mx
Offline
Last seen: 2 years 10 months ago
Joined: 01/03/2018 - 13:28
Hi, need a startup tune for:

Hi, need a startup tune for:

aem ems v1 (Seria# 1602-0013)

1998 Kouki Silvia (S14a, belive same as S15).

GT2871r Turbo

Nismo 740 Injectors

FMIC, N62 Maf,91 octane, walbro 255,

Tomei Poncams

 

email: melficemx@gmail.com

 

kimaeh
Offline
Last seen: 2 years 10 months ago
Joined: 01/18/2018 - 19:03
Anybody got a base map?

Anybody got a base map?
For supra 2jz gte us spec
Aem v1 30-1100
Stock 550ccm injectors
264 camshaft
Stock turbos
Hks Dli
3inch downpipe and exhaust
Front intercooler
Aem map sensor and aem iat sensor

Anybody got a map i can use to start it?

Golka
Offline
Last seen: 2 years 8 months ago
Joined: 02/21/2018 - 22:29
1990 1.6 miata turbo

1990 1.6 miata turbo

Looking for a basic .cal file to get it to start up and trailer it to get tuned. 1.6 turbo, AEM EMS, 680cc injectors.

Santafe308
Offline
Last seen: 2 years 8 months ago
Joined: 03/06/2018 - 15:58
30-1060 ems 1998 honda civic

30-1060 ems 1998 honda civic d15b7 block d16y8 head (ported) 11.1 comp ratio 240cc honda injectors stock honda map

integlspwr
Offline
Last seen: 4 months 2 days ago
Joined: 04/09/2018 - 18:38
AEM EMS 1052 Version 1

AEM EMS 1052 Version 1

2001 Honda S2000

Stock Motor except for Test Pipe & Exhaust

Just need to tune for more mid-range, lower v-tec etc and I am looking for a startup Base Calibration File.

If someone could e-mail me at integLSpwr@gmail.com, or send me a message, that would be great.

Thanks!

prestonztt
Offline
Last seen: 1 day 10 min ago
Joined: 03/24/2018 - 01:00
2002 Subaru WRX

2002 Subaru WRX

AEM 30-1810

Needing a start up map please.

Mods:

2.0L

Stock Engine/Heads

Speed Density

1650cc High-Z Injectors

GM 3-Bar MAP

GM IAT

E85 Fuel @43.5psi of Fuel Pressure 

I can be emailed at: prestonztt@yahoo.com

 

Thank You,

Preston

alex617
Offline
Last seen: 2 years 6 months ago
Joined: 05/19/2018 - 18:30
hey im new to the site

hey im new to the site looking for a b18b  0r b20 all motor with bolt on and 2 step and lil more fuel

bolt like cold air intake straight pipe  not cat  my email is ala617@gmail.com

 

 

Slice787
Offline
Last seen: 1 year 10 months ago
Joined: 06/07/2018 - 09:50
2001 s2000 F20c stock block

2001 s2000 F20c stock block

AEM 1052u

AEM boost solenoid

HKS BOV

Tail 44mm WG

GT35 turbo

log manifold

1000cc injectors stock fuelrail

3'' Downpipe back

need something to get me to work and back nothing crazy

Mustangturbo98
Offline
Last seen: 2 years 5 months ago
Joined: 06/18/2018 - 18:23
1993 Mustang, Hi, calibration

1993 Mustang, Hi, calibration needed for 1993 Mustang Gt, It is a 5.0l engine with Trick Flow Heads, F303 cam, Trick Flow intake, 65mm TB, #42 Injectors, V1 Vortech Supercharger (8psi) Thank You

STICKY40SX
Offline
Last seen: 2 years 4 months ago
Joined: 07/26/2018 - 15:40
New to this.

s13 SR20DET 240SX M/T

Serial# 1601-0169

GT28, Z32 MAF,

Walbro 255 Fuel Pump, 

Stock Fuel Rail and FPR, 

850CC Denso Sard Side feed INJStock bottom end 

1.2MM Headgasket 

3in Turbo Back Exhaust  

DblTrbl
Offline
Last seen: 10 months 1 week ago
Joined: 08/15/2016 - 14:10
Hi, Looking for a base cal

Hi, Looking for a base cal for my infinty 508 

6.0 LQ4  LS1.

24x

2.5 bar

80 lb siemens deka injectors

42 psi base pressure

-2cc forged pistons

BTW I'm a 12 year AEM engine management user.. red car.. 12 years ago.--->   https://www.youtube.com/watch?v=_IzBncZYk2k 

Rezeeb
Offline
Last seen: 2 years 1 month ago
Joined: 08/30/2018 - 10:15
Looking for base map to get

Does any one have a base auto trans map for an Aristo a340e? There are no base calibrations for the 2jzgte in my ecu. Even just screen shots of the gear table and other specs. Thank you

92smokeaccord
Offline
Last seen: 1 year 11 months ago
Joined: 12/30/2018 - 03:43
Need help with map sensor

Need help with map sensor calibration. I can’t find any info on this map sensor for the aem unit 

Aem v1 1000-0234 

92 accord 

Speed factory 4bar map sensor

F22a turbo fully built aris pistons eagle rods 

Brian crower cams,springs,retainers

 

EDWINJRM
Offline
Last seen: 1 year 10 months ago
Joined: 11/12/2018 - 08:52
YOU EVER GET THIS ? I NEED

YOU EVER GET THIS ? I NEED THE SAME A EPM SETUP STARTING POINT 

Pages