30-6052 PnP No Fule Pump Output on A-15 | AEM
3 posts / 0 new
Last post
Loconda
Offline
Last seen: 3 years 11 months ago
Joined: 06/27/2014 - 05:24
30-6052 PnP No Fule Pump Output on A-15

I'm a new user with a brand new Series 2 for my 2000 S2000 F20c.  Have gone through all the wizard setups on the AEMTuner program per the Fasking tutorials, everything appears to be working correctly and within range.  I have the fuel pump relay wired to pin A-15.  When I turn power on and connect to the ECU, select the Start function, there is no activation of the fuel pump relay.  The installation directions indicate there should be about a 2 second run of the fuel pump to get pressure up, but this never happens.  I tested the power level at A-15 and there is no voltage at any time.  I can manually engage the FP relay, so I know that works.  Any suggestions as to why the relay never gets activated by the ECU.  Thanks in advance.

AEM_NS
Offline
Last seen: 3 weeks 5 days ago
Joined: 06/06/2014 - 09:31
Add the channels Fuel Pump

Add the channels Fuel Pump and LS11 to your workspace.  With the coils and injectors disconnected, key on and then crank the engine.  What do the channels say during cranking?

Loconda
Offline
Last seen: 3 years 11 months ago
Joined: 06/27/2014 - 05:24
We are all packed and headed

We are all packed and headed out of town.  Will do this when we return and give you the results.  Many thanks for the rapid response.