S2 Calibration Requests: please ask for maps in THIS THREAD ONLY | Page 2 | AEM
239 posts / 0 new
Last post
Ultimate_Noobage
Offline
Last seen: 5 years 6 months ago
Joined: 12/26/2014 - 12:48
AEM Series 2 30-6052

AEM Series 2 30-6052

2001 Honda S2000

F20C Stock

Stock injectors

91/93 Octane, stock fuel pump

Stock map sensor

Modifications:

K&N Drop-in Air filter

 

Need Calibration Please.

papagogo
Offline
Last seen: 3 months 3 weeks ago
Joined: 10/28/2014 - 03:25
AEM EMS V2  30-6100.

AEM EMS V2  30-6100.

2JZ-GTE, swap in 200SX

 Precison Turbo 6266 A/R 0.84

Cam GSC stage 1 Power Division

Injector 1000cc  Delphi, precision turbo (they are same) LOW IMP  WITHOUT RESISTOR BOX !!

AEM 3.5 Map sensor

Other sensors are OEM

3 bar fuel pressure

Sorry for my english, i'm a french guy !!

 

thanks

Ultimate_Noobage
Offline
Last seen: 5 years 6 months ago
Joined: 12/26/2014 - 12:48
Has anyone actually gotten a

Has anyone actually gotten a calibration from AEM? It looks like they don't even respond to anyone.

AEM_NS
Offline
Last seen: 17 hours 43 min ago
Joined: 06/06/2014 - 09:31
I'm sorry but we've only ever

I'm sorry but we've only ever supplied our standard release base cals.  The purpose of this thread is to request cals that would be provided by other users, not AEM.

AEM_NS
Offline
Last seen: 17 hours 43 min ago
Joined: 06/06/2014 - 09:31
BTW what you're looking for

BTW what you're looking for is well covered by our provided base cal.  Have you tried using it?  I used that cal recently to test an EMS on a stock S2000 and it started on the first try.

sbarraza18
Offline
Last seen: 5 years 5 months ago
Joined: 01/17/2015 - 18:32
hello new to aem was

hello new to aem was wondering if anyone had a base map for an is300 aem 30-1910 stock engin 550 injectors 7psi boost closest place to tune car is 220 miles away need something that can at least get me there or at least started thanx  

Supra_
Offline
Last seen: 5 years 5 months ago
Joined: 02/03/2015 - 14:58
Hi I just bought an aem v2

Hi I just bought an aem v2 Aem 30-6101 and need a base map calib asap please..

1994 supra 2jzgte single turbo borg Warner s366, single bosch 044 pump, 1000cc ID, 3.5bar map sensor, 94 oct

Thank you!

I know the Aem 30-6101 is for the non turbo but I was told with the good calib it'll work on the 2jzgte.

AEM_NS
Offline
Last seen: 17 hours 43 min ago
Joined: 06/06/2014 - 09:31
We don't recommend using a

We don't recommend using a different EMS than what's intended for a particular application.  The 6100 and 6101 EMS's do have different hardware and each have been specifically engineered for their respective applications (Twin Turbo Supra vs n/a Supra & SC300).  We absolutely can not guarantee that the 6101 will work properly on a 6100 car and as such, doing so is at your own risk.

efedrino
Offline
Last seen: 5 years 4 months ago
Joined: 02/17/2015 - 00:23
AEM Series 2 30-6052

AEM Series 2 30-6052   v1.24

2001 Honda S2000

F20C Stock

Stock 340cc injectors

95 Octane, stock fuel pump

Stock map sensor

Modifications:

mugen Air intake

toda torque kun header

Header back q300 single 2.5" Single Exhaust (No Catalytic Converter)

Need Calibration Please.

beezer6768
Offline
Last seen: 4 years 3 weeks ago
Joined: 02/17/2015 - 13:02
Looking for a calibration for

Looking for a calibration for a J32A2 in a 97 civic. stock engine with intake, header and exhaust. Anybody got a good working tune?

 

JulianFlores7
Offline
Last seen: 5 years 4 months ago
Joined: 06/23/2014 - 14:54
1989 toyota supra

1989 toyota supra

AEM V2 6050 box from driftmoting plug and play

2jz NAT using stock 7mgte 89+ wiring harness

268ttc cams, stock degree

custom ffim with 90mm throttle body, 3' intercooler and piping

t4 manifold with bullseye s366 .91 ar divided turbo

Aem 3.5 bar map sensor and AEM IAt snesor, AEM UEGO

Siemens Deka 750cc injector and a AEM 320lph intank pump

would like 10-12psi

would like a bse map to run and drive if you can. Thanks!!

 

georgevti
Offline
Last seen: 5 years 4 months ago
Joined: 03/05/2015 - 12:59
AEM Series 2 30-6052

AEM Series 2 30-6052

2004 Honda S2000

F20C Stock

Stock 340cc injectors

100 Octane, stock fuel pump

Stock map sensor

madserv
Offline
Last seen: 5 years 4 months ago
Joined: 03/11/2015 - 03:42
Dear 

Dear 

 

please i need the following basemap for my car

EMS P/N 30-6620

1996 Nissan Silvia

Engine : Sr20det  

Injectors : stock 370cc

Fuel : 93 octaine

Map : 5 bar aem mapsensor

EMS part number, Vehicle Year/Manufacturer/Model, Engine Displacement, Injector flow rate, fuel used (gasoline/methanol/E85, etc), MAP sensor type. (tuners, please suggest other info that may be helpful and this post can be updated)

73 RBZ
Offline
Last seen: 5 years 3 months ago
Joined: 08/20/2014 - 20:29
Hello,

Hello,

I have a 30-6620

I'm looking for a base calibration for a stock RB20DET. I can't find the base calibration in the folders, it appears to only have the RB25 and RB26.

Thanks

axelkoop
Offline
Last seen: 3 years 5 months ago
Joined: 03/27/2015 - 13:31
30-6600 series 2

30-6600 series 2

nissan sentra b13

SR20DE stock

STOCK MAF

STOCK INJECTORS

NEGTRAC
Offline
Last seen: 2 years 9 months ago
Joined: 03/29/2015 - 12:20
AEM EMS V2

AEM EMS V2

1994 toyota supra

2jzgte 3.0 (stock displacement)

91 octane

78/68 turbonetics turbo

1000cc 12ohm injectors (high impendence)

3.5 bar map sensor

aem air temp and failsafe gauge

the motor and harness are JDM aristo. The car runs with stock computer (rich) ,but won't run with AEM EMS V2. (no spark)

THRUSTBORNE88
Offline
Last seen: 5 years 3 months ago
Joined: 03/29/2015 - 18:16
Not sure if I can request

Not sure if I can request from here, but here it goes,

EMS-4

HONDA B/D/H EPM

D16Z6 10.0:1

 ZEX 59500 CAM

BOSCH 2000CC HIGH IMP

OMNI 3BAR

PUMP E85

HONEYWELL GT35R WITH SMALLEST BACK HOUSING AVAIL. FOR IT

ALL STOCK HONDA SPEED, AIR & WATER TEMP,& TPS SENSORS WITH IACV & 

!!!CAR WAS TUNED ON HONDATA & MADE DECENT POWER(400WHP@16PSI-6.5K,RPM), AT THIS [POINT GOT THE CAR RUNNING BUT NOT SURE OF CALIBRATION , EPM IS ALSO POSSIBLY SO FAR OFF, ITS ALMOST DANGEROUS TO RUN OR START. PLEASE HELP OR I CAN SEND /UPLOAD CALIBRATION !!!

 

 

josefer2009jose
Offline
Last seen: 5 years 3 months ago
Joined: 03/30/2015 - 20:41
AEM Serie 2 30-6052

AEM Serie 2 30-6052

2005 Honda S2000

550cc injectors

Pump Gas

Race exaust

turbo T3-T4

stock map sensor

modification:

turbo kit, turbo manifold, wastegate 8pounds, aem wideband,  walbro 255, 

PLEASE Calibrate a Map just 8pounds max,   to be SAFE

My email: joselferrer1980@hotmail.com

urgent

jery76
Offline
Last seen: 5 years 3 months ago
Joined: 04/06/2015 - 20:53
Need a basemap for K20A2, 

Need a basemap for K20A2, 

AEM A/F LSU 4.9                30-4110

AEM Boost Gauge               30-4406

AEM Boost Control Solenoid 30-2400

PTE 6262

MAP 3bar GM 

ID injectors 1000 cc

Walbro Fuel 255

Intercooler air to air 

 

email: jeremy76ne@yahoo.com

Zbig67
Offline
Last seen: 4 years 7 months ago
Joined: 04/02/2015 - 18:17
 

 

Aloha,

i am in needd of a base map/start up calibration.

ems-4 p/n 30-6905 sn 1593

87 corolla sr5 w/04' toyota tacoma 2rz-fe swap 2.4L (completly stock)

coil on plugs

stock 310cc injectors

walbro 255L

92octane

2.5'' exhaust piping

thank you.....

Turbolude95
Offline
Last seen: 5 years 2 months ago
Joined: 10/31/2014 - 13:56
Here's a bit of an update I

Here's a bit of an update I actually wired in all the twin fire setup and have spark now on all cylinders wired to the instructions... And yes sensors are grounded to d21 and d22, My MAP sensor is registering reading -1.0 I've tested the sensor and it makes pressure when you add pressure and vise versa, I set throttle position it works great, I setup the coils with and the phasing is set the same as injectors 12, 6, 18, 0 now I've been trying to setup the timing with the timing wizard but can't seem to figure it out considering I thought the car had to be running? I had a friend crank it over while I tried to to determine it but that was an epic fail!!! (With the distributor and the stock computer I had it set at 1 degree advanced but I could get it running)This all based off the startup calibration that the series 2 came with "del sol H22 swap" I know I am close, O2 FB is off but it's just getting right 

DarrenA
Offline
Last seen: 4 years 9 months ago
Joined: 05/14/2015 - 10:26
30-6100

30-6100
Aristo 2jzgte
Usdm cams
3.5bar aem map
Id1000's
Borger warner s366
Walbro 400
Other than that stock

1jzsc3
Offline
Last seen: 5 years 1 month ago
Joined: 06/12/2015 - 04:21
1993 sc300

Need driveable 91 octane base tune.

1993 Sc300

1jzgte swap

single turbo 60-1 Driftmotion Kit

760cc Bosch Injectors

BC 272 small core cams

Aeromotive Fuel Pressure regulator

AEM 3.5bar map sensor (NOT INSTALLED)

superspark coilpacks

R154/LSD

mk3vvti
Offline
Last seen: 3 years 11 months ago
Joined: 07/11/2015 - 19:45
aemv2 30-6050

aemv2 30-6050

pnp harness runs the factory ecu in conjunction with aem v2

5bar map aem

tweaked performance aristo 2jzgte vvti harness with maf/map 5plug ecu

gm iat

aristo 2jzgte vvti

pte 6766 turbo journal bearing

turbo xs top mount

tiat mvr wastegate 15psi

bosch 1700cc injectors

e85 im thinking for fuel

aeromotive fuel pressure regulator

triple coils waste spark

base map to get me to the tuner beyond redline in green bay wi.

Phoubles
Offline
Last seen: 2 years 3 weeks ago
Joined: 07/15/2015 - 11:07
AEM V2 from driftmotion

AEM V2 from driftmotion

1991 Toyota Supra MK3 3.0L 7MGTE, Manual 5-speed transmission.

550cc Modified Bosch 11mm, low impedance injectors

60-1 Partial Turbo Kit from driftmotion.

AEM 3.5 Bar Map Sensor Kit

AEM Air Temp Sensor Kit for Standalone ECUs

AEM Wideband UEGO Air/Fuel ratio gauge 30-4110

Aeromotive AFPR Kit

Walbro Fuel Pump 255

I can't start my engine. Those are the parts i have changed on my car. evertyhing else is stock. It would be nice to have map for those settings so i could drive my car to dyno for better tuning.

myteluze
Offline
Last seen: 2 years 11 months ago
Joined: 07/23/2015 - 21:04
Basically... just looking for

Basically... just looking for the correct/compatible setting for these injectors for the supplied AEM base startup. Based on my research, I believe the ID1000 settings should work since they are also Bosch EV14 based but I wanted to make sure. Thanks.

 

1992 Nissan S13 180sx, ECR33 RB25DET Series 2 Engine

AEM 30-6620 Series 2 Engine Management System

AEM 30-2400 Boost Control Solenoid Kit

AEM 30-2130-50 50 PSIA or 3.5 Bar MAP Sensor Kit

AEM 30-2010 Air Inlet Temperature Sensor Kit

Fuel Injector Development 1000cc Bosch based Ev14 High Impedance fuel injectors

Magnafuel 625 EFI Pro Tuner in line pump and dual Magnafuel fuel filters

Garrett GTX3076r turbo, .82 A/R exhaust housing

Tomei Pon Camshafts, duration: IN,EX 256 Lift: IN,EX 8.5mm #143020

CP-Carrillo 86.5mm 9.0:1 forged pistons

91 Octane pump gas

HARDKORECHOPRODZ
Offline
Last seen: 4 years 11 months ago
Joined: 07/16/2015 - 08:20
AEM 30-6050

AEM 30-6050

 

i need start up calibration for 2003 SRT10 motor with paxton novi2000 supercharger

injector 60 lbs

gm 3 bar map sensor

42 lbs fuel pressure static

meldelro
meldelro's picture
Offline
Last seen: 2 years 3 months ago
Joined: 02/19/2015 - 13:22
Looking for start up

Looking for start up calibration for the following:
 

1992 Nissan 240SX

KA24DE

AEM Series 2 30-6600

89.5mm 9.0:1 CP Pistons

GTX2863R

AEM 2.0bar MAP Sensor

AEM AIT Sensor

Circuit Sports 720cc Injectors

Walbro 255lph fuel pump

93 Octane

Innovate LC-1 Wideband wired to standalone

Email is meldelro(at)gmail.com Thanks!

1992 Nissan 240SX KA-T | 1998 BMW M3 | 2004 Nissan Armada | 2014 Suzuki GSX-R600

Tracktooler
Tracktooler's picture
Offline
Last seen: 4 years 9 months ago
Joined: 09/17/2015 - 09:34
Hi From Germany.

Hi From Germany.

1994 Toyota Supra TT 6speed

Stock engine

102 Octane fuel

EMS Series 2

30-6100

AEM 3,5 Bar Map sensor

AEM Solenoid

AEM 320L/h fuel pump

Aftermarket fuel pressure on round about 47PSI

RC1200 injectors

AEM Air temp Sensor

AEM inline type wideband uego controller

BorgWarner S366

Presicion 46mm springs works on 15psi

thanks :-)

 

 

Cknight90
Offline
Last seen: 4 years 9 months ago
Joined: 09/23/2015 - 18:12
Series 2 30-6060

Series 2 30-6060

OBD2a AEM EMS

OBD2b to OBD2a jumper

Acura Integra GS-R B18c1 basemap please

Disable 2nd 02 if its enabled

Disable KS

Disable KPS

Stock Injectors

After market Intake

Walbro 255 Fuel pump

Stuck Fuel Pressure Regulator

 

By the way is this ECU OBD2B & OBD2A?

 

 

00 Acura Integra GS-R 4 door | OBD2B car

Pages