2jz hall effect cam and crank senor wiring | AEM
3 posts / 0 new
Last post
peej47
Offline
Last seen: 4 months 4 weeks ago
Joined: 01/13/2019 - 10:38
2jz hall effect cam and crank senor wiring

I installed cam and crank hall effect sensors on my 2jz-gte using infinity 506. these are 3 wire sensors compared to the factory 2 wire. what pins should i wire these up to? i see on the pinout sheet c1-25 and 26 show hall effect input. should these be used or where the cam and crank sensors are wired to now, c1-17 through c1-20

AEM_HB
Offline
Last seen: 14 hours 2 min ago
Joined: 11/07/2016 - 09:22
Peej47,

Peej47,

C1-25 and C1-26 will be the inputs for your crank and cam signals. Be sure to re-sync your ignition timing after sensor install.

peej47
Offline
Last seen: 4 months 4 weeks ago
Joined: 01/13/2019 - 10:38
great! thank you

great! thank you