AEM’s High-Output Inductive Coils on AEM 30-1100 | AEM
4 posts / 0 new
Last post
F_MK4
Offline
Last seen: 2 years 3 months ago
Joined: 03/26/2018 - 12:33
AEM’s High-Output Inductive Coils on AEM 30-1100

Dear Sirs,

I would like to know AEM’s High-Output Inductive Coils PN:30-2853 (Trigger 0-5v) can run on 2jz AEM v1 (Toyota Supra 2jz-gte, year 1994) ?

Because it's written that "Ignition driver type: 0-2.5V Logic" in the "Installation Instructions for EMS P/N 30-1100"
 
Best regards

AEM_NS
Offline
Last seen: 16 hours 31 min ago
Joined: 06/06/2014 - 09:31
Yes, the 2853 Smart Coils

Yes, the 2853 Smart Coils will work with a 1100 ECU. I'm guessing that note you referenced is a typo.

F_MK4
Offline
Last seen: 2 years 3 months ago
Joined: 03/26/2018 - 12:33
Ok, there is an mistake on

Ok, there is an mistake on the technical document ? it is not 2.5v but 5v ?

AEM_NS
Offline
Last seen: 16 hours 31 min ago
Joined: 06/06/2014 - 09:31
Yes I'm supposing so because

Yes I'm supposing so because all of our Supra PnP ECU's (Series 1, Series 2 and Infinity Series 5 and Series 7) have always outputted 5v falling edge ignition triggers.