AEM 30-6050 temp sensor reading incorrect | AEM
5 posts / 0 new
Last post
dalegneiting
Offline
Last seen: 1 year 1 week ago
Joined: 07/25/2017 - 20:36
AEM 30-6050 temp sensor reading incorrect

I am having a problem with my Temp sensor that the ECM uses, it is the 2nd new one and the wiring harness is brand new.  I have verified the tempature to be at 180 using a tempature gun when the sensor says its 106 and the wizard was used to configure the the new sensor.   Can the sensor be manualy calibrated sense the wizard is off for the matching application each time.  I am kinda upset because after some other problems it has resulted in a leaking headgasket from aparently a over heating condition, even thought the radiator and all other cooling system parts are brand new.

 

 

AEM_PT
Offline
Last seen: 2 months 2 days ago
Joined: 05/22/2014 - 08:13
Which temp sensor are you

Which temp sensor are you using? Are any of your other sensors reading in error? Since the sensor ground is shared, anything that may be wired improperly could skew the readings.
As for manually scaling/calibrating the sensor within the software, you could access the table in the sensors tab.

dalegneiting
Offline
Last seen: 1 year 1 week ago
Joined: 07/25/2017 - 20:36
The sensor is the 2000-2002

The sensor is the 2000-2002 and no other sensors have errors. All are working with in normal conditions.

AEM_PT
Offline
Last seen: 2 months 2 days ago
Joined: 05/22/2014 - 08:13
2000-2002? Please elaborate.

2000-2002? Please elaborate.

dalegneiting
Offline
Last seen: 1 year 1 week ago
Joined: 07/25/2017 - 20:36
Honda S2000 for the years

Honda S2000 for the years 2000-2002