AFR and Boost in Log wildly "off" | AEM
1 post / 0 new
familyMAN
Offline
Last seen: 1 year 49 min ago
Joined: 09/23/2019 - 11:53
AFR and Boost in Log wildly "off"

AFR is literally off the scale rich, 4:1 - 6:1 idle and cruising (Units are set in the calibration to gas scale and the correct sensor is used). Wideband shows ~14:1

Boost in log is 30's at idle and up to 100's driving and boost (Units in the map calibration are set to psi).

 

I've opened the log in AEMLog and AEMData with the same results. Stumped. Figure it has to be something in the calibration. Trying to help out a friend retune his car after a couple changes but the log doesn't make sense. Everything else is logging correctly. 

Thanks!