3 posts / 0 new
Last post
stony
Offline
Last seen: 23 hours 10 min ago
Joined: 10/03/2015 - 16:35
Aftermarket industries dual pump mount.

I recently purchased a AEM fuel pump

https://www.rallysportdirect.com/shop/product/aem-50-1005-aem-380lph-in-line-fuel-pump

to replace a Bosche 044 that died on me. im using an aftermarket industries (AI) dual pump mount.

http://www.aftermarketindustries.com.au/billet-bosch-044-fuel-pump-bracket-p172/

the kit includes

  • 1 x Billet Twin Fuel Pump Bracket
  • 4 x NBR Rubber Moulds
  • Stainless Steel Fasteners
  • 2 x Billet One Way M12x1.5 to -8AN Check Valves (black anodise only)
  • 2 x -8AN Bosch 044 inlet fittings
  • 1 x Billet 2-into-1 twin converter block with -8AN outler fittings (ports are -8AN)

The output side of the AEM pump is bigger then the 044 and i need a different adapter for the check valve on the AI. Does anyone have any ideas on how i can adapte this pump to the dual pump mount.

 

If its not adaptable any sugestions on how to bring 2 of the aem pumps into one -8an fitting in the least amount of space possible.

AEM_GN
Offline
Last seen: 3 years 6 months ago
Joined: 02/18/2014 - 09:55
The outlet of the AEM pump is

The outlet of the AEM pump is a -6 however a -6 to -8 check valve fitting is supplied in the kit. Is the converter block reverse threads?

nighthawk
Offline
Last seen: 2 years 6 months ago
Joined: 02/13/2017 - 15:49
How is it compared to Bosche

How is it compared to Bosche fuel pump?