5 posts / 0 new
Last post
DIoXIDaZ
Offline
Last seen: 1 year 5 months ago
Joined: 05/08/2016 - 21:46
AQ-1 Wiring Ground/Shield Pinouts misinformation

Hello,

I'm trying to figure out AQ-1 Wiring schemes

I'm looking at document provided by device inside the box.

Pin 5 - Ground/Shiled (Mistype Sheild...) - Is it ground for a sensors? or for any device? No explanation..

Pin 19 - On document - Sensor Ground, on Manual paper Power Ground

Pin 35 - Shield - In Document file in app ( USB Ground ) so is it USB Ground or just a Shield for sensors? Or it doesn't matter?

Please, let me know what is the right wiring?

 

AEM_NS
Offline
Last seen: 1 year 4 months ago
Joined: 06/06/2014 - 09:31
Do you already have an AEM

Do you already have an AEM made harness or are you trying to make your own?

DIoXIDaZ
Offline
Last seen: 1 year 5 months ago
Joined: 05/08/2016 - 21:46
Thank you for reply, I'm

Thank you for reply, I'm trying to make my own.

I have almost solved all the questions only with the right wiring pins, due to different information on different documents.

AEM_NS
Offline
Last seen: 1 year 4 months ago
Joined: 06/06/2014 - 09:31
5 is the ground drain for

5 is the ground drain for cable shields. 19 is power ground for powering the logger. 35 is the ground drain for the USB cable shield.

DIoXIDaZ
Offline
Last seen: 1 year 5 months ago
Joined: 05/08/2016 - 21:46
AEM_NS wrote:

AEM_NS wrote:

5 is the ground drain for cable shields. 19 is power ground for powering the logger. 35 is the ground drain for the USB cable shield.

Thank you for explanation, that's very helpful for me, and I hope for other people.

Maybe a documentation fix ? :)