7 posts / 0 new
Last post
Mikko.P
Offline
Last seen: 4 months 3 weeks ago
Joined: 12/19/2015 - 08:48
CAN problem with infinity 8H

Hi

I installed a infinity 8H with PnP harness to my golf 2000. Motor is swapped completely from -05 seat leon FR ( AUQ ), but instruments and ecu was from golf gti. Installation was simple and it was running after 1 night work, but CAN wont communicate with abs or instruments. Should i change some settings to get it work? We checked allready that my pin out is same than on AWP engine, so that should be fine.

I have nevest infinity tuner  2.96.8227 and software v96.1 Inf-8h Universal

-Thanks-

E: Do i need to install also peripheral firmaware?

 

AEM_NS
Offline
Last seen: 1 year 2 months ago
Joined: 06/06/2014 - 09:31
Unfortunately the 8h (now

Unfortunately the 8h (now called Infinity 508) v96.1 firmware didn't include the VW CAN data stream stuff in it.  It's been added and will be in our next update which will be released very soon.  Keep in mind that your dash must be AWP spec in order to work.  Older dashes appear to use a different CAN protocol and will not work with the Infinity.  

Mikko.P
Offline
Last seen: 4 months 3 weeks ago
Joined: 12/19/2015 - 08:48
Ok, so waiting this new

Ok, so waiting this new update. Hopefully you get it out soon. Should i try out with old software that would it work. Dash change is not a problem in this case, if it is needed...

Mikko.P
Offline
Last seen: 4 months 3 weeks ago
Joined: 12/19/2015 - 08:48
Is this (Infinity-8h

Is this (Infinity-8h Universal V96, old version)

working with newest infinity tuner also, that i can make some testing on my car?

AEM_SB
Offline
Last seen: 4 days 15 hours ago
Joined: 06/07/2014 - 14:29
The older firmware  (Infinity

The older firmware  (Infinity-8h Universal V96, old version)     did not  support the VW CAN  or the VW cam/crank pattern. I would recommend to continue using what you already have until the next update is released. 

Mikko.P
Offline
Last seen: 4 months 3 weeks ago
Joined: 12/19/2015 - 08:48
Ummm, now im confused. How

Ummm, now im confused. How can you sell PnP adapter harness for vw 1.8t if software cannot support CAN like it is said on marketing..?

AEM_NS
Offline
Last seen: 1 year 2 months ago
Joined: 06/06/2014 - 09:31
It was an oversight on our

It was an oversight on our part to not include the VW CAN in the 508 firmware in the previous releases.  The Infinity 506 is the intended EMS to be used on the VW 1.8t app and as such, it has the VW CAN and is fully functional.  As we said before, you'll need to wait for the new firmware release which is supposed to be next week.  

Topic locked