Cannot PC log or internal log switch 2 | AEM
1 post / 0 new
Gearbound
Offline
Last seen: 1 year 9 months ago
Joined: 11/04/2018 - 07:28
Cannot PC log or internal log switch 2

The goal is to capture switch 2 for a vss signal. I'm using a t56 with a 12 tooth reluctor and a vr sensor. My mph "reading" is bouncing from 2mph to 255 mph in 1st gear at 1000rpm. Right now it sorta works for my reverse lockout and 2step as it reads 0 when stopped. But I need it for boost by gear. Currently doing boost by rpm :/

 

I've tried PC logging with the tab on tacho-speedo and added switch 2 to the displayed channels. This didn't work.

 

I tried internal logging and picked it as a slow channel. I didn't see it in the log at all as a channel to view.