CD-7 on two Infinity EMS’s | AEM
4 posts / 0 new
Last post
MBender
Offline
Last seen: 2 years 1 week ago
Joined: 09/09/2018 - 18:52
CD-7 on two Infinity EMS’s

I read that the CD-7 can display from two inputs at once, but does this work with two Infinity EMS’s? For example, would I be able to display engine speed from two engines (each with their own 3 series EMS) at once?

 

 

AEM_HB
Offline
Last seen: 1 hour 37 min ago
Joined: 11/07/2016 - 09:22
Yes, the CD-7 can recieve CAN

Yes, the CD-7 can recieve CAN data from two sources. In this set up you will need each ecu wired to a separate port on the CD-7 and the setup will need to be manually configured.

MBender
Offline
Last seen: 2 years 1 week ago
Joined: 09/09/2018 - 18:52
Great, assuming if I do that,

Great, assuming if I do that, I CANNOT do the GPS as well? Or will it be able to read both EMS's and the GPS?

AEM_HB
Offline
Last seen: 1 hour 37 min ago
Joined: 11/07/2016 - 09:22
GPS will still function

GPS will still function normally, you would only need it wired into port 1 or 2(not both) if using an external gps device like the AEM VDM. You could also use a dash with internal gps like the CD-7LG PN:30-5703