Connectorizing Sensors | AEM
4 posts / 0 new
Last post
Indy
Offline
Last seen: 2 years 10 months ago
Joined: 03/24/2015 - 07:49
Connectorizing Sensors

I have your gauges number 30-4401, 304402 and 304110. I want to use Deutsch DT connectors so I can easily remove my dash.

Is there any reason why I should not use a Deutsch DT connector for the sensor wires???

AEM_NS
Offline
Last seen: 15 hours 15 sec ago
Joined: 06/06/2014 - 09:31
Deutsch DT is kind of big for

Deutsch DT is kind of big for 20/22 gauge wire.  I'd suggest going with DTM.  No problem adding in a secondary connector assuming they're installed/wired correctly.

Indy
Offline
Last seen: 2 years 10 months ago
Joined: 03/24/2015 - 07:49
Took your advice and bought a

Took your advice and bought a kit for DTM connectors from WireCare.com. The dash is going into a TBucket.

Below is how it turned out ......

I used shrink wrap to color code wires and when I didn't have what I needed, I used a

Sharpie to put a band on the shrink wrap.

AEM_NS
Offline
Last seen: 15 hours 15 sec ago
Joined: 06/06/2014 - 09:31
Looks great. 

Looks great. yes