Data Overlay | AEM
2 posts / 0 new
Last post
01-0041
Offline
Last seen: 11 months 1 week ago
Joined: 05/22/2014 - 15:16
Data Overlay

I’d like to overlay data from two different drivers/sessions, but unfortunately I haven’t been able to figure it out. Could someone shed some light on the subject?

Thank you for your time! 

AEM_NS
Offline
Last seen: 1 hour 24 min ago
Joined: 06/06/2014 - 09:31
Refer to this pic:

Refer to this pic:

Open the Project Exlorer (Alt+F7).  Click on the Open Log icon and navigate to the logs you want to open - select them and open them.  You can add more logs to the Explorer at any time - you don't necessarily have to pick them all at once.  They'll stay in the Explorer until you remove them (or close the software).  With the files you want in the Explorer, make sure the logs are expanded to show All and Out like shown.  Click All for the log you want on Layer 1 and then click the 1 icon.  Then double click All for the log you want on Layer 2.  Now both logs will be displayed with 1 on top of 2.  

You can put any log on Layer 1 by selecting All and then clicking the 1 icon.  You can remove any log from a layer by double clicking on All.  You can put a log on Layer 2 on Layer 1 by selecting 2 All and then clicking the 1 icon.  Just play with it and you'll see how it works.  It's pretty intuitive once you get the hang of it.