Dwell setting | AEM
2 posts / 0 new
Last post
mackie
Offline
Last seen: 12 hours 29 min ago
Joined: 01/01/2015 - 10:11
Dwell setting

Where do I set the dwell setting for the AEM High Output IGBT Smart coil and what setting should I put for the S54 engine?

AEM_BB
AEM_BB's picture
Offline
Last seen: 1 year 5 months ago
Joined: 06/04/2014 - 11:53
Coil dwell is set using the

Coil dwell is set using the 2D table "Coil Dwell". Confirm the units are set to milliseconds (mS) using Wizards --> Units Preferences. We typically recommend a base dwell of 3.0mS for these coils as a starting point. Increase from there if more energy is needed but typically 3mS from these coils is enough for almost all engines.