Green LED not always illuminated under boost | AEM
2 posts / 0 new
Last post
bazgreener
Offline
Last seen: 3 weeks 4 days ago
Joined: 07/13/2020 - 00:33
Green LED not always illuminated under boost

hi all,

   I have had my AEM WMI kit installed for a few weeks now and was working fine but i have noticed recently that under longer periods of boost the external LED status light is not constantly illuminated, it starts dim and works to full brightness as it should but after 5 or 6 seconds of full boost the light with go out and then come back on again, is this correct? The LED is always green and I am getting no flashing red codes.  I can see no ignition retard on my logs so I assume that the water is still spraying but the light going out worries me.

It's an Audi 1.8T and currently at 25psi on a K04. I am injecting just straight water.

 

thanks

Barrie

AEM_NS
Offline
Last seen: 1 hour 31 min ago
Joined: 06/06/2014 - 09:31
If the external LED cuts out

If the external LED cuts out after a few seconds, what does the LED on the controller do?