Had a starting issue now have a stay running issue. 2jz gte | AEM
2 posts / 0 new
Last post
Noyz25
Offline
Last seen: 4 years 10 months ago
Joined: 08/18/2015 - 06:21
Had a starting issue now have a stay running issue. 2jz gte

Yesterday no spark. Cleaned the prongs of the camshaft position sensor which worked last time but this time no luck. Crankshaft and camshaft position sensor check out species(ohms). Today I disconnected the ecu plugs and connect it back on cause my laptop wasn't reading it.This morning the ecu didn't want to connect. So I tried what some say to do. Disconnected the ecu and plugged back in. I connected and decided to crank and see what happen and it started with me not doing anything but it died and now it starts but won't stay on unless I give it some gas. Any help is appreciated because I am new to AEM and tuning.

Noyz25
Offline
Last seen: 4 years 10 months ago
Joined: 08/18/2015 - 06:21
Staying on after new plugs

Staying on after new plugs but running too rich and sometimes stalls. Here is a video.https://youtu.be/siwVHxElfco