Honda K20A2 base map | AEM
4 posts / 0 new
Last post
Tunerfleg
Offline
Last seen: 2 months 1 week ago
Joined: 01/06/2018 - 01:59
Honda K20A2 base map

Hi guys,

I am new to the AEM infinity stuff. I searched around unsuccessful to find a base map to start with, as I have issues to get it done with the K20A3 base map. Would be glad if you guys could help me out, by supporting with an K20A2 base map.

Cheers

TF

 

Tunerfleg
Offline
Last seen: 2 months 1 week ago
Joined: 01/06/2018 - 01:59
No one has a simple and

No one has a simple and reliable K20A2 base map and willing to share with an K20 mate?

AEM_PT
Offline
Last seen: 3 months 1 week ago
Joined: 05/22/2014 - 08:13
The supplied K20A3 session

The supplied K20A3 session should be more than sufficient as a starting point for you to reconfigure basic differences in componenets that are used to start your motor. 

Please contact Tech Support directly at 1800-423-0046 Ext. 303

Tunerfleg
Offline
Last seen: 2 months 1 week ago
Joined: 01/06/2018 - 01:59
The supplied K20A3 base map

The supplied K20A3 base map was unfortunatelly not sufficient to start the engine. Seems to be the modifications where to much. I adjusted almost everything in the Wizard and for the Injector and Start sheet. But finally it worked out. The engine runs on street race cams with 26 kPa at 1400 rpm at lambda = 1 and needs a IACV duty cycle of about 40 % more then the K20A3 seems to need. MAP sensor is cross checked at engine out condition against the atmospheric pressure sensor, result was around 0.003 bar difference.