Infinity PnP: Race car harness and wiring details on turbo build. | AEM
1 post / 0 new
oldmanlance
Offline
Last seen: 1 year 7 months ago
Joined: 12/29/2017 - 14:38
Infinity PnP: Race car harness and wiring details on turbo build.

 

1.  Factory body harness has been completely removed;  engine harness has been kept so all but one of the PnP connectors is used.  No more CAN bus at all.  How can I get the MK60 ABS to input wheel speeds into the Infinity?

2. What special wiring needs are there, having everything wired as a "race car"?  meaning, ignition switch, push button starter, etc...

3. For a turbo setup, which sensors are needed to be wired into the AUX setup?  Im thinking fuel pressure sensor, MAP, E85, boost solenoid, boost trigger switch, no lift.   Do I need an IAT sensor as well?

4. For running VAG coils (audi/vw), what needs to be wired differently on the AEM to control these ignition coils?

 

Main concern now is getting wheel speed inputs back into the AEM, since my ABS runs standalone currently, and there is no CAN bus system on the car anymore...

 

Thanks.