J32a2 on infinity 506 | AEM
2 posts / 0 new
Last post
Strokesj32a2
Offline
Last seen: 7 months 2 days ago
Joined: 12/30/2019 - 18:55
J32a2 on infinity 506

I have a j32a2 running on a aem infinity 506. It has a custom wireworx harness but running into issues on the map sensor. When the car is idle it is showing almost 5lbs of boost which we all know is not correct. It has a aem 5 bar map installed, ive switched it out for another good sensor and same issue. When i check the voltage im only getting like 1.4v and if im correct i should be at 5v. Any ideas what and where to check

lordonairgallow
Offline
Last seen: 2 days 8 hours ago
Joined: 11/03/2014 - 10:17
Double check sensor power is

Double check sensor power is from C1-49/50 5V+ reference and sensor gnd is from C1-23/24 also make sure the correct sensor is selected in the wizard for your MAP sensor c1-52