K series Crank sensor errors after between 5k - rev limit | AEM
2 posts / 0 new
Last post
Redzonedb8
Redzonedb8's picture
Offline
Last seen: 3 months 2 weeks ago
Joined: 04/10/2020 - 15:16
K series Crank sensor errors after between 5k - rev limit

 

Aloha, 

I've been chasing an error with the Crabk sensor on my wife's car. We are using a 508 with rywire engine harness  the issue we are having, we get a crank sensor error after Vtec and before the rev limit and it's causing the car to shut down because the computer is reading over 11k rpm when it happens. So essentially it is hitting the rev limiter and causing the car to stutter through the rpm band  I see crank errors when this happens  I have replaced the sensor with a brand new one and it worked for a short time and came back. Any ideas on what we should be checking? I've also started playing with noise cancelation settings in the software but nothing changes  I can send logs if needed  

any help would be great! 

 

AEM_NS
Online
Last seen: 2 min 42 sec ago
Joined: 06/06/2014 - 09:31
https://www.aemelectronics