Lap Times, How is a best lap time?? | AEM
7 posts / 0 new
Last post
Matias
Offline
Last seen: 3 years 7 months ago
Joined: 06/04/2014 - 09:52
Lap Times, How is a best lap time??
problem to calculate lap times in milliseconds , use the aemdata , 4.0.38 build 723 Lap divide 50 milliseconds , and I need to divide by 5 milliseconds , appreciate the answers, because I have several months , trying to solve with the technical support of the company without result.

 

[IMG]http://i62.tinypic.com/dls21i.jpg[/IMG]

 

THANKS

 

Kurt
Kurt's picture
Offline
Last seen: 1 week 1 day ago
Joined: 06/04/2014 - 17:17
Are you adding custom markers

Are you adding custom markers?  Is your log at 200hz?  Your 50ms marker resolution suggests your log is at 20hz.  Even with a lower speed log, you can set custom markers at any time value you want and get the 5ms lap resolution.  I'm not sure it will be very meaningful with a 20hz log, though.

Matias
Offline
Last seen: 3 years 7 months ago
Joined: 06/04/2014 - 09:52
Hi Kurt , thanks for the
Hi Kurt , thanks for the quick response, that channel must be recorded at 200mhz ?. Calculated distance is 20 mhz . As this change to 200 mhz ?, thanks
Kurt
Kurt's picture
Offline
Last seen: 1 week 1 day ago
Joined: 06/04/2014 - 17:17
Matias, please answer these

Matias, please answer these questions:

How many samples per second is your log file?

How are your lap markers being generated?

 

If you are setting your own custom markers based on some channel from the log file, and the log file is only 20Hz (50ms) then that is the greatest resolution you will get for lap times.  If you're generating a calculated distance channel, it will be at the sample rate that Vehicle Speed is recorded at.  If you have your lap times with greater precision from some other source, you can enter your markers with any precision you want and your displayed lap times will show that precision.  Open Help from AEMData and look under "Using AEMData" and you will find much info on markers.

Matias
Offline
Last seen: 3 years 7 months ago
Joined: 06/04/2014 - 09:52
am very grateful with your
 am very grateful with your help, I do not understand that when you channel referees you ask me recording speed ,
To generate one channel Calculated Distance 20Hz Gps Venus, give me your email , I sent the data file,

 

Kurt
Kurt's picture
Offline
Last seen: 1 week 1 day ago
Joined: 06/04/2014 - 17:17
"problem to calculate lap

"problem to calculate lap times in milliseconds , use the aemdata , 4.0.38 build 723 Lap divide 50 milliseconds , and I need to divide by 5 milliseconds , appreciate the answers, because I have several months , trying to solve with the technical support of the company without result."

If I understand you, the problem is you have lap precision in AEMData of 50ms and you want a precision of 5ms.  Is that correct?

 

Please answer these questions:

How many samples per second is your log file?

How are your lap markers being generated?

Matias
Offline
Last seen: 3 years 7 months ago
Joined: 06/04/2014 - 09:52
Hi kurt give me you email i

Hi kurt give me you email i send my log file