Mast Motorsports M90 ECM, J1939, and the CD-7 | AEM
3 posts / 0 new
Last post
highhplowiq
Offline
Last seen: 9 months 18 hours ago
Joined: 07/13/2018 - 11:05
Mast Motorsports M90 ECM, J1939, and the CD-7

Has anyone or does anyone know if the CD-7 will work with the Mast Motorsports M90 ECM?  Mast told me anything that uses J1939 will interface with their system but that is all I know.  I don't know if you need an adapter, custom programing, etc.  Looking for some advice.  This is a LS2 408 engine in a rockcrawler buggy.  Thanks

AEM_HB
Offline
Last seen: 1 hour 42 min ago
Joined: 11/07/2016 - 09:22
I recently had a customer

I recently had a customer confirm that the CD-7 works with the J1939 on the Mast M90 ECU. All the dash requires is the can to be wired into PORT2/CAN2 and the J1939 setup to be loaded.

highhplowiq
Offline
Last seen: 9 months 18 hours ago
Joined: 07/13/2018 - 11:05
AEM_HB wrote: I recently had

AEM_HB wrote:
I recently had a customer confirm that the CD-7 works with the J1939 on the Mast M90 ECU. All the dash requires is the can to be wired into PORT2/CAN2 and the J1939 setup to be loaded.

Great news!  One question.  The J1939 setup.  I have not seen that in the manual.  Is that a config option within the dash or something I need to download? 

In addition to purchasing the CD-7, I'm guessing I will need the 30-2218 power cable for my application?  And if I want to monitor trans temp, I will need to purchase the 22 channel CAN sensor module correct? I want to have my ducks in a row before diving in.

Thank you.