Multiple Selections in Trace | AEM
4 posts / 0 new
Last post
Kurt
Kurt's picture
Offline
Last seen: 2 weeks 5 days ago
Joined: 06/04/2014 - 17:17
Multiple Selections in Trace

Trying to compare relevant sections of data in an XY plot, ignoring all the extra "stuff".  Is this currently possible?  Can it be added? 

 

Example of what I'd like to do (photoshoped):

AEM_JR
AEM_JR's picture
Offline
Last seen: 3 months 3 days ago
Joined: 05/26/2014 - 00:08
It can't do it that way

It can't do it that way currently. You can set up the XY plot to only show data based on a specific channel data, like, only show data within the selected range, and only then when TPS > 90%. That is under the conditions tab in the XY plot.

 

 

ruddyrid
ruddyrid's picture
Offline
Last seen: 4 months 3 weeks ago
Joined: 06/10/2014 - 20:52
If that's the case, wouldn't

If that's the case, wouldn't it be possible to somehow create an artificial channel [that the user/tuner] can modify. Then set the selected range to only show/plot data when said channel is above 0 for example on a 0-1 [On/Off] scale.

AEM_JR
AEM_JR's picture
Offline
Last seen: 3 months 3 days ago
Joined: 05/26/2014 - 00:08
Yes, thats exactly how you

Yes, thats exactly how you could do it. Math channels allow all sorts of logic and if you can logically define what you want to show the you can create a math channel that determines if your conditions have been met. This would then be used to select data for inclusion in an XY plot.