My AEM 30-4110 Display show "---" - I'm in Brazil | AEM
2 posts / 0 new
Last post
Dilbert25
Offline
Last seen: 2 months 3 weeks ago
Joined: 05/21/2020 - 18:01
My AEM 30-4110 Display show "---" - I'm in Brazil

HI,

I seem to be running into the same issue many people on this and other forums are running into.

I purchased a  30-4110 wideband, installed new. Installation ok. I drove for more than 100km without problems, working perfectily.

I put the car away and spent few weeks without using it. Now car reads 14.7 for a few seconds, then with ten seconds climbs through the digits until full lean "---" displayed. If you shut the car off and back on again, goes through same symptoms.

Car is definitely not running lean, if anything it is running rich.

I dont know what to do.

And the worst part, I´m in Brazil.

AEM_NS
Offline
Last seen: 25 min 48 sec ago
Joined: 06/06/2014 - 09:31
Contact Tech Support: gen

Contact Tech Support: gen.tech@aempower.com