No RPM Infinity 8H, No Start | AEM
1 post / 0 new
Last seen: 11 months 2 weeks ago
Joined: 12/28/2017 - 16:55
No RPM Infinity 8H, No Start

I have a DSM 1G CAS Module, The  Cam and Crank signal are connected to PIN C25 and C26 on the infinity, The voltage from the CAS to the ecu input should be 0-5volts I am told,If the Voltage is higher say 9 or 12volts can this damge the ecu. Will the ecu even read this signls at that high voltage?