Question about 35-2610 pin kit | AEM
5 posts / 0 new
Last post
azfiveoh
Offline
Last seen: 3 years 2 months ago
Joined: 01/07/2015 - 07:39
Question about 35-2610 pin kit

What are the 15 large pins used for that come with the 35-2610 wiring kit?

AEM_NS
Offline
Last seen: 18 hours 3 min ago
Joined: 06/06/2014 - 09:31
The connectors in the 2610

The connectors in the 2610 kit use two different sized pins.

azfiveoh
Offline
Last seen: 3 years 2 months ago
Joined: 01/07/2015 - 07:39
Thanks!

Thanks!

azfiveoh
Offline
Last seen: 3 years 2 months ago
Joined: 01/07/2015 - 07:39
The numbers on the back of

The numbers on the back of the connectors do not correspond to the pin location diagram on the 30-6050 instruction sheet.  For example the diagram in the 30-6050 instructions show Connector A pin 11 on the top rightmost side of the back of the connector. However, the pin itself is labelled pin 1.  What's strange is that the power and ground locations referenced in the 30-6050 document correspond to large pins but the connector labels those as small pins which leads me to believe the connectors themselves are mislabeled.  Would you kindly clarify if should reference the document or the connector itself.

AEM_NS
Offline
Last seen: 18 hours 3 min ago
Joined: 06/06/2014 - 09:31
Follow the diagram for pin

Follow the diagram for pin location.  The connector manufacturer's numbering doesn't follow Honda's OEM pin number which is what we followed when making a Honda plug and play EMS.