S1 Calibration Requests: please ask for maps in THIS THREAD ONLY | AEM
108 posts / 0 new
Last post
AEM_NS
Offline
Last seen: 1 hour 57 min ago
Joined: 06/06/2014 - 09:31
S1 Calibration Requests: please ask for maps in THIS THREAD ONLY

Please make all calibration requests in this thread. 
Please DO NOT create new threads asking for maps. They will be deleted!

AEM startup calibrations can be found in the C:\Program Files\AEM\AEMPro\Startup Calibrations folder.

In your request, please include the following information (feel free to add other info you think may be useful):
EMS part number, Vehicle Year/Manufacturer/Model, Engine Displacement, Injector flow rate, fuel used (gasoline/methanol/E85, etc), MAP sensor type. (tuners, please suggest other info that may be helpful and this post can be updated)

Example: 
30-1080 EMS, 1991 Honda CRX,  1.6L (Japanese B16 engine with ported heads and aftermarket cams), RC Engineering  440cc/min injectors, 91 octane pump gas, stock Honda MAP sensor.

FYI, many tuners will not give their work away for free. Even if someone sends a calibration that may work with your setup, it is always a good idea to have the car tuned by an experienced professional who is familiar with vehicles and power levels similar to your goals.

turb0g33k
Offline
Last seen: 5 years 10 months ago
Joined: 06/27/2014 - 16:32
Posting again.

Posting again.

(30-1100) calibration wanted

(SC300)

2JZ-GE NA-T

GTE headgasket

(Otherwise stock internals)

550cc injectors

T4 A/R .70 (gt35 equivelant?) turbo

7M CPS w VVTi coil packs.

 

basically something along these lines would seriously help.

 

ildar
Offline
Last seen: 5 years 4 months ago
Joined: 06/15/2014 - 22:37
30-1010 EMS

30-1010 EMS

1997 Toyota Supra

3.0 l 2JZ-GE japan

Siemens Deka 800 cc/min injectors

95/98 octane gasoline

Garrett T60-1

7M cam sensor

Wasted spark ignition system from Toyota Aristo VVTI

AEM MAP 3.5 bar

AEM boost solenoid

AEM UEGO external controller

Bosch idle control motor

2JZ-GTE crank position sensor

 

coachflip
Offline
Last seen: 6 years 3 months ago
Joined: 07/09/2014 - 19:36
Any help would be great.

Any help would be great.  Just looking for examples to verify ignition setup and breakpoints. Thanks to anyone that responds.

30-1600 Series 1 

1993 Nissan NX2000

stock FWD BB SR20DET 7500 RPM Redline/8000RPM Breakpoints

93 Octane Pump

1000cc RC Eng. Injectors

24+1 CAS Disk

S15 COP Ignition

3.5 Bar AEM MAP

GM IAT

AEM UEGO External Wideband

AEM Boost Control Solenoid

Nissan IACV

Nissan Crank Position Sensor

nx2000
Offline
Last seen: 5 years 3 months ago
Joined: 06/04/2014 - 14:22
I have no idea how to attach

I have no idea how to attach a file

Scupraboost
Offline
Last seen: 6 years 2 months ago
Joined: 07/30/2014 - 11:23
Ok so i downloaded the newest

Ok so i downloaded the newest version for aem series 1 v1.19.. But i have no startup calibration files.. All folders for toyota, honda, nissan etc are all empty. Where are the startups at? Also all the rest of the files are empty as well.. If i go to batch import gdf's all folders have nothing in them. AHHHH

Marvin Bogle
Offline
Last seen: 6 years 1 month ago
Joined: 08/28/2014 - 19:55
Good afternoon I require a

Good afternoon I require a startup calibrations for all stock d16a9 civic obd1 1992 if 4d (mounted on my 1989 integra ls) which is not included in my folder of acquired ems 30-1080

 

30-1080 EMS, 1989 acura integra,  1.6L (Japanese ZC (D16a9) all oem obd1 of civic 1992), oem injectors, 91 octane pump gas, stock Honda MAP sensor

Thank you for your attention and response

Saviour250
Saviour250's picture
Offline
Last seen: 4 years 1 week ago
Joined: 09/03/2014 - 13:27
1040u ems series 1

1040u ems series 1

for Honda Del Sol B16a Turbo

forged rods, Pistons

precision injectors 880cc

skunk 2 pro 1 cams

AEM MAP 3.5 bar

AEM boost solenoid

BlueS2
Offline
Last seen: 5 years 9 months ago
Joined: 10/08/2014 - 09:48
I'm after a calibration file

I'm after a calibration file as near to my specs as possible so I can get it started & to the tuners to get it mapped properly! :-)

AP1 S2000 F20C MY00

1012 Aem Series 1 (yep I know its a long shot but I think a map from a 1052 will be similar)

Hondata 4 Bar Map

Deatschwerks 1000cc injectors.

98 octane gasoline

Rotrex C38-81 supercharger (TTS race conversion)

PLM manifold

Invidia Exhaust

Decated

320lph Fuel pump

Thanks for looking :-)

 

 

 

topsekret
Offline
Last seen: 2 years 5 months ago
Joined: 10/12/2014 - 08:25
i need a calibration for a

i need a calibration for a

1993 civic

b20z with stock  injectors and 91 octane  on a 1040 series one just to use as a stock start up with twinfire cop. exhaust and intake

thank you

ScSmooth
ScSmooth's picture
Offline
Last seen: 5 years 11 months ago
Joined: 10/26/2014 - 09:01
EMS series 1 30-1310

EMS series 1 30-1310

1998 Eclipse GSX 4G63 auto trans

Big 16G turbo, FIC 1150cc Injectors, Greddy type RS bov, God Speed front mount intercooler, AEM Gauge-Type Uego controller 30-4100, AEM 320lph fuel pump 50-1200, Aftermarket fuel pressure regulator (Looks like an Ebay one), Everything else is stock, 93 octane gas

Just looking for something to get the car running. Then I can tune after. Thank you for any help you can give me.

 

psipwrd
Offline
Last seen: 2 years 9 months ago
Joined: 10/28/2014 - 02:14
Hi all, new user here with

Hi all, new user here with bad OEM ECU.  I need a calibration map plz:

30-1120 EMS, 1992 Toyota Celica Alltrac CS,  2.0L 3SGTE (Forged pistons/rods, 268 cams), stock 440cc injectors, 94 octane pump gas, stock Toyota MAP AFM.

 

Thanks in advance!

koskos
Offline
Last seen: 2 years 4 months ago
Joined: 10/30/2014 - 08:57
AEM Series 1 EMS 30-1040

AEM Series 1 EMS 30-1040

1JZ-GTE VVTi

Brian Crower 272\272

GTX3582R

ID 10000cc

Nissan PW Idle control valve

Castor
Castor's picture
Offline
Last seen: 3 months 1 week ago
Joined: 11/01/2014 - 14:24
AEM 30-1600 pulsar gti-r 1992

AEM 30-1600 pulsar gti-r 1992 2000cc gasoline 9:1comp, ported head, Tomei in270 ex270 solid tipe, 1mm oversize valves, stock inj 444cc/min low imp, stock MAF, stock ignition, stock T28 turbo, AEM 320lph Fpump. thank's for your help!

ScSmooth
ScSmooth's picture
Offline
Last seen: 5 years 11 months ago
Joined: 10/26/2014 - 09:01
Just curious, Has anyone

Just curious, Has anyone received a calibration?

Castor
Castor's picture
Offline
Last seen: 3 months 1 week ago
Joined: 11/01/2014 - 14:24
Not yet, but soon..... I

Not yet, but soon..... I think so .....frown.......LOL

ScSmooth
ScSmooth's picture
Offline
Last seen: 5 years 11 months ago
Joined: 10/26/2014 - 09:01
I hope so.

I hope so.

TwoJZGTE
Offline
Last seen: 5 years 10 months ago
Joined: 10/26/2014 - 02:12
30-1810 wrx box,  00 Leus

30-1810 wrx box,  00 Leus gs300, stock Aristo 2jzgte VVTI, bosch 850cc high imp, GM 3 bar map, GM IAT,

running stock ecu at same time to controll VVTI, Trans, DBW.

Looking for a base map with proper settings for this setup OR just a map with all the proper settings selected and entered and i can go from there.

Thanks in advance.

mannySUBII
Offline
Last seen: 1 year 9 months ago
Joined: 12/01/2014 - 07:50
hey was up i was just

hey was up i was just wondering if you ever got a cal for your setup.i have a smiler setup andi think it would trun my car on to get it dyno tuned

 

90tsiawd
Offline
Last seen: 5 years 9 months ago
Joined: 12/03/2014 - 19:12
10-1300 1990 Eagle Talon

10-1300 1990 Eagle Talon

I cant seem to find much info on how to adjust for PTE 1200CC injectors(same latenc as 1000CC) And im running a Freescale 4 bar sensor(same as omni power 4bar) I just found out that I need to swap the sensor input. I have it on the Baro input. Thanks for any help!

thecrownwrench
Offline
Last seen: 5 years 9 months ago
Joined: 12/27/2014 - 20:14
I need a calibration for 

I need a calibration for 

2004 jeep grand cherokee 4x4 

4.0 stock ecm auto trans

FIC 6 30- 1913

super charger 6 psi boost

bosch injectors 550 cc # 0280158193

 

Eclipse Performance
Offline
Last seen: 5 years 3 weeks ago
Joined: 12/30/2014 - 22:42
(30-1100) calibration wanted

(30-1100) calibration wanted

JDM Supra

2JZ-GE NA-T

GTE headgasket

Stock Internals so about 9.2:1 Compression

3bar GM Map sensor

Aem Wideband

850cc Bosch high impedance injectors

Borg Warner S366

7M CPS with  VVTi coil packs so wasted spark

 

basically something along these lines would seriously help.

Thanks

1994mkiv
Offline
Last seen: 2 months 1 week ago
Joined: 02/07/2015 - 10:33
(30-1100) calibration wanted

(30-1100) calibration wanted

2JZ-GTE

272 cams

FIC 2150cc injectors / E85

GT45 - 80 mm

Stock coils

AEM 5 bar map

nersa123
Offline
Last seen: 5 years 8 months ago
Joined: 02/15/2015 - 19:27
Looking for starting

Looking for starting calibration forv 1994 toyota supra tt

550cc injectors

mikesloud
Offline
Last seen: 2 years 6 months ago
Joined: 02/28/2015 - 10:52
anyone have a base map for gm

anyone have a base map for gm 3 bar  series 1 for supra tt  1200cc injectors and 68mm , please any help or advice appreciated 

nico
Offline
Last seen: 5 years 6 months ago
Joined: 03/08/2015 - 19:00
ecu  1030u-0016 base map

ecu  1030u-0016 base map wanted

1986 bmw 325e stock

2.7L inline 6

 

mukxmk3
Offline
Last seen: 5 years 7 months ago
Joined: 03/15/2015 - 16:58
Would like map for my mk3

Would like map for my supra

1990 toyota supra 7mgte 5spd
30-1130 ems
Aem3.5 bar map
Aem iat
Stock ct26
Stock injs
Stock cams
Stock ignition

BoostedSVT
Offline
Last seen: 5 years 6 months ago
Joined: 06/21/2014 - 17:30
please and thank you, i need

please and thank you, i need a cal file for the following setup to get it running and driving enough to get the car back on the dyno rollers.

EMS 30-1401/1995 mustang GT

331CI Stroker/9.6:1, dart pro 1 heads/turbocharged 76MM 12PSI

80lb siemen deka injectors/93 pump gas/A1000 pump

GM 3 Bar map sensor pn 12223861

holley systemax intakes

custom grind 600/610 lift cam 112 lobe sep.

blkevo8
Offline
Last seen: 5 years 7 months ago
Joined: 03/23/2015 - 12:50
2005 Mitsubishi Evo 8

2005 Mitsubishi Evo 8

AEM 3.5 bar map sensor on speed density

FIC 2150cc high impedance 8.5ohm injectors (resistor delete mod accomplished)

twin intake walbro 255lph fuel pumps (second pump kicks in at 16psi)

aeromotive fuel rail (stock FPR)

2.3 stroker with Eagle 100mm crank, JE stroker pistons, Howards performance rods

HKS 272/272 cams

mild head port

ball bearing FP Black turbo with JM Fab tubular header

 

jholmes24
Offline
Last seen: 4 years 7 months ago
Joined: 04/06/2015 - 17:09
Hoping to get a little help,

Hoping to get a little help, i've done alot of digging through forums and what not trying to find the info i need but so far i'm unable to do so. running 7m-gte bored .20 over/ on aem v1 30-1130 ems , aem 320lph pump, stock injectors. gm 3 bar map and intake air temp sensor at around 20 psi, car would misfire at higher boost levels, so i decide to make the switch to lq9s. ls2 coils with the heatsink.

 

gt45 turbo

3inch turbo back exhaust.

here's my problem area- lq9 coils wired in wasted spark arrangement, i've tripple check all my wiring to the stock plug, the car fires right up, but then after a few seconds shuts off. i can't find anyone with settings for cam sensor setup, inj/ignition phasing, although i see many claming they're running this setup. car ran good before so i'm sure no mechanical issues are present. if i could get a calibration for the 7m-gte to run the lq9s(BYPASSING THE STOCK IGNITER) i would very thankful. thanks in advance.

vonz
Offline
Last seen: 3 years 12 months ago
Joined: 04/21/2015 - 00:40
Please help I want a map for

Please help I want a map for my Honda

Aem ems  series 1   1020

I prefer B16B   or B16 B18C  engine

Pages