235 posts / 0 new
Last post
AEM_NS
Offline
Last seen: 3 days 2 hours ago
Joined: 06/06/2014 - 09:31
S2 Calibration Requests: please ask for maps in THIS THREAD ONLY

Please make all calibration requests in this thread. 
Please DO NOT create new threads asking for maps. They will be deleted.

AEM startup calibrations can be found in the C:\Program Files\AEM\AEMTuner\Calibrations folder.

In your request, please include the following information (feel free to add other info you think may be useful):
EMS part number, Vehicle Year/Manufacturer/Model, Engine Displacement, Injector flow rate, fuel used (gasoline/methanol/E85, etc), MAP sensor type. (tuners, please suggest other info that may be helpful and this post can be updated)

Example: 
30-1080 EMS, 1991 Honda CRX,  1.6L (Japanese B16 engine with ported heads and aftermarket cams), RC Engineering  440cc/min injectors, 91 octane pump gas, stock Honda MAP sensor.

FYI, many tuners will not give their work away for free. Even if someone sends a calibration that may work with your setup, it is always a good idea to have the car tuned by an experienced professional who is familiar with vehicles and power levels similar to your goals.

smoothdjpa
Offline
Last seen: 5 years 1 month ago
Joined: 06/07/2014 - 18:43
EMS II 30-6620.

EMS II 30-6620.

1995 Nissan 240sx.

R33 Skyline RB25DET swap

TREPerformance 1000cc/min @43.5psi injectors

Walbro 255

AEM 3.5BAR Map Sensor

AEM UEGO Wideband

------------------------------------------------------

Bored .20 over

RB26 pistons (89.5mm  9:1cp)

Cometic 1.1mm hg

CXRacing HBeam rods

Godspeed Top Mount mani

35r turbo

Tial F38 Wastegate (1.0 bar or 14.5psi spring)

-------------------------------------------------------------------------

The injectors use Bosch EV1 harnesses

Having an issue tuning as to the car breaking up slightly and cant narrow down whats causing it between myself and my tuner.

If anyone has a map with a close setup I could compare my tune with it would be greatly appreciated.

I Also have logs available.

 

 

Press22
Offline
Last seen: 6 months 4 weeks ago
Joined: 06/30/2014 - 18:38
AEM V2 from Driftmotion

AEM V2 from Driftmotion

1986 BMW E28

1JZ-GTE Swap

Stock 340cc injectors

Walbro 255

Stock map sensor

PLX devices wideband

------------------------------------------------------

Stock motor

6262 Single Turbo

Stock intake manifold

3" front mount intercooler

3" straight pipe exhaust

greddy BOV (if it matters??)

Would like a reliable tune for daily driving. Hot vegas summer.

sanfransoto
Offline
Last seen: 5 years 10 months ago
Joined: 07/06/2014 - 02:11
stock long block 2jz-gte 3.0L

stock long block 2jz-gte 3.0L  6spd supra engine in lexus sc400

with:

aem v2

hks t51r turbo (kai-70mm)

3.5 map sensor

91 octane but also e85-  hoping to do flex fuel tuning (i have the flex fuel sensor wired in already)

FIC 1450 cc low imp injectors/ bosch 044 fuel pumps (in line)

 

hondacivic90ed
Offline
Last seen: 5 years 10 months ago
Joined: 07/13/2014 - 11:17
AEM EMS Series 2 30-6040

AEM EMS Series 2 30-6040

1990 Honda Civic Dx hatchback

B18C5 Integra Type R Swap

Stock 240cc/min injectors

91 octane fuel with Walboro 190lph fuel pump

Stock ITR map sensor

--------------------------------------------------------------------------

Engine Modifications:

JDM ITR 4-1 header

Spoon throttle body

AEM hybrid intake

AEM inline wideband

AEM high flow fuel rail

Rywire Mil-Spec harness converting engine to OBD-2 sensor input to OBD-1 plug pinout at ECU

---------------------------------------------------------------------------------

Looking for startup calibration

 

s2slo
Offline
Last seen: 5 years 9 months ago
Joined: 08/02/2014 - 10:14
AEM Series 2 30-6052

AEM Series 2 30-6052

2001 Honda S2000

F20C Stock

Stock 340cc injectors

91/93 Octane, stock fuel pump

Stock map sensor

Modifications:

K&N Drop-in Air filter

Header back Berk 3" Single Exhaust (No Catalytic Converter)

Need Calibration Please.

 

YoshiFD3S
Offline
Last seen: 5 years 9 months ago
Joined: 08/03/2014 - 19:30
AEM EMS V2 - latest firmware

AEM EMS V2 - latest firmware

2JZ-GE NA-T setup 

2JZ-GTE Coil-Packs and Ignitor

7M-GTE Cam Position Sensor

550cc DENSO Injectors

93-octane - Walboro 255lph Fuel-Pump

Turbonetics 62-1 Turbo

2.5mm Boost-Logic Head-Gasket

AEM UEGO Wideband Sensor

GM 3-Bar MAP Sensor

Defi Boost & Coolant Temp Sensors

3.5" intake, FMIC, full 3" straight-pipe exhaust, no cat

- Just need a nice baseline calibration to get it started. Thank you!

InIMoeK
Offline
Last seen: 5 years 9 months ago
Joined: 06/22/2014 - 14:25
30-6600, 1993 Nissan Pulsar

30-6600, 1993 Nissan Pulsar Gti-R, 2.0L ( stock SR20DET RNN14 GTIR ), stock 444cc injectors, stock pump RON98/E85, AEM 3 bar MAP sensor, AEM air temp sensor, AEM GTIR CAS disk, Bosch 044 fuel pump intank

Raysupra
Offline
Last seen: 2 years 1 month ago
Joined: 08/24/2014 - 12:03
AEM EMS V2 6100

AEM EMS V2 6100 (V3.2)

1983/TOY/Supra

2999cc 3.0L/Comp 9.5

Bosch 1000cc High Z

93 Oct Pump

AEM 3.5 MAP (30-2130-50)

AEM IAT 30-2010

AEM Failsafe Wideband

IS300 Ignition coils/ DH61 Ignitor

7mgte CPS

Toyota Supra(89-92) Automatic

VSS-(89-92) Automatic

 

DereckR
Offline
Last seen: 2 years 3 days ago
Joined: 08/24/2014 - 14:34
AEM EMS V2 6050

AEM EMS V2 6050

2003 Lexus Is300

1JZ-GTE VVTi

R154 5 Speed Transmission

AEM Boost Control Solenoid

AEM 3.5bar Map Sensor

AEM UEGO Wide Band

GM IAT Sensor

91 Octane

Stock Injectors

Stock Turbo

3" Downpipe and Exhaust

3" Intercooler Kit

Titan Motor Sports Cam Gear set at 0

Walboro GS342 on stock fuel pressure regulator 1jz

I am needing a tune to start and to carry for a real tune to happen. Reliable as possible.

Element204
Offline
Last seen: 5 years 8 months ago
Joined: 08/31/2014 - 10:51
AEM EMS V2 30-6050

AEM EMS V2 30-6050

2001 Lexus is300

2JZ-GE VVT-I

5 SPEED FACTORY AUTO TRANS

CX RACING TURBO/INTERCOOLER KIT: GT35 TURBO

BRIAN CROWER CAMSHAFTS

BOSCH 550CC INJECTORS

WALBRO 255 FUEL PUMP ON STOCK PRESSURE REG

3" EXHAUST

BOSCH WIDEBAND AFR

AEM 3.5BAR MAP SENSOR

GM IAT SENSOR

WASTEGATE SET AT 8PSI

Would like a startup calibration to begin base tuning. thanks

heist
Offline
Last seen: 5 years 8 months ago
Joined: 09/01/2014 - 12:49
AEM EMS V2 

AEM EMS V2 

2001 Honda S2000

F20C1 (stock injectors, 91) 

I'm just looking for a stock map or one with exhaust/intake to get me going. Appreciate it in advance! 

DereckR
Offline
Last seen: 2 years 3 days ago
Joined: 08/24/2014 - 14:34
Has anyone actual received a

Has anyone actual received a basemap? No one has replied or emailed me with one?

mrsoarer
Offline
Last seen: 5 years 8 months ago
Joined: 09/03/2014 - 20:37
Hello I too need calibrations

Hello I too need calibrations for 1jzgte vvti 30-6050 aem ems 2 from drift motion.

The 93 lexus sc300 original 5 speed has the following :

1jzgte vvti mated to w58 with usdm 2jzgte 550cc
Walbro 255
Tomei Cam gears
Tomei poncams
Tomei turbo for the 1jzvvti
3inch intercooler piping
3inch exhaust piping

With individual wiring for the coilpacks.
Aem wideband
Aem bar map

I need the 1jzgte vvti calibrations map please.

My email is kiochiu@gmail.com

CESAJANS
Offline
Last seen: 5 years 4 months ago
Joined: 09/06/2014 - 07:52
30-6040 EMS2  1994 HONDA DEL

30-6040 EMS2  1994 HONDA DEL SOL 1.6 B16A2 DOCH-VTEC

PORTED HEADS ALL FORGED AFTERMARKET PARTS

11.2 Cr. standart  stroke. 

Jackson Racing SC with 10psi boost.

AEM COP KIT

440cc RC injectors

Motec 3 bar map sensor

68mm trothle body

97 octane pump gas.

email: info@cesajans.com

Raysupra
Offline
Last seen: 2 years 1 month ago
Joined: 08/24/2014 - 12:03
No reason for everyone asking

No reason for everyone asking for basemaps, no one is receiving any.

Turbolude95
Offline
Last seen: 5 years 1 week ago
Joined: 10/31/2014 - 13:56
Hello I been fighting with

Hello I been fighting with this ECU for almost 2 years to get my car running on it... I've researched watched videos and nothing the closest I got was the car injecting fuel into the motor but no ignition... From what I could tell all the components on the ignition sector of this ECU were ON and ready for action...I can only get it running with the stock computer and it sounds really strong... need a startup calibration for a S2 30-6040, 95 prelude it has a Frankensteind H23 vtec... Boosted with a turbonetics T3 .57 trim on a blueridge motorsports twisted ram horn header 3" down pipe all plumbed in with 2.5" piping, 70mm BGL throttle body, after market stage 2 cower turbo cams, AEM adjustable cam gears ( set at TDC) skunk 2 pro series intake, accel 660cc injectors (currently running stock) AEM fuel rail and regulated to 28psi18, ignition system consists of just a stock distributor with a MSD external blaster coil, 3.5 bar AEM MAP sensor, AEM  UEGO wideband AFR,  motor is fully built 

i do have a COP AEM twin fire kit with an AEM EPM as well but I wouldn't even know we're to begin with it any help or MAP to get this thing running would be appriceated... And would bring a 2 year battle to an end cuz really all I guy wants to do at this point is race! And unfortunate circumstances dictate I am un able to afford paying for expert help.... So you can say I am here begging some to help!! Lol Thanks in advance to anyone wanting to help a guy out! 

Lindsay Apostol...
Offline
Last seen: 5 years 4 months ago
Joined: 08/20/2014 - 18:12
Hey folks I'm after a map to

Hey folks I'm after a map to get me going to suit a non vvti 1jzgte
1000cc injectors 43.5psi on e85
single turbo td06 sl2 25g
30-6050 Honda box from driftmotion
toyota intake and coolant temp sensors
3.5bar aem map

Anything to get me in the ball park would be great

SlideOrDie
Offline
Last seen: 2 years 1 month ago
Joined: 11/07/2014 - 15:53
Aem v2 30-6101

Aem v2 30-6101
Need a start up cal but cant use the factory aem pre set i dont think

2jz ge nat
Garrett t04b
1jz coilpacks
7m cas
Gte ignitor
Rx7 550cc injectors
Ffim converted
Aem 3.5 map
Aem uego wideband
Fid 340lph fp

Any other info you need just ask and ill give it

dylan craig

megomaniac
Offline
Last seen: 2 years 5 months ago
Joined: 11/09/2014 - 21:15
http://my.is/forums/f114/aem
sheedy126
Offline
Last seen: 5 years 5 months ago
Joined: 11/18/2014 - 19:23
Aem v2 30-6050 from

Aem v2 30-6050 from driftmotion

7mgte
Upgraded 62mm holset hx35
stock 7mgte coil packs
stock cps
stock igniter
Rc 550cc injectors 
Aem 5 bar map sensor
Aem uego wideband
walbro 255 fp

Aermotive FPR

2.5" intercooler piping

just looking for a base cal. file to get it running and able to drive it to the tuner. thanks!

megomaniac
Offline
Last seen: 2 years 5 months ago
Joined: 11/09/2014 - 21:15
https://drive.google.com/file

https://drive.google.com/file/d/0B-PB8SRgAeeGQjNhZTdaMzhfSjQ/view?usp=sh...

Try this map, Should start it.No drive time yet just idling and reving.

I'm on aristo 440's, fuel return about 42psi base. Timing sync'd.

 

megomaniac
Offline
Last seen: 2 years 5 months ago
Joined: 11/09/2014 - 21:15
here is another .cal for 2jz

here is another .cal for 2jz vvti.

No vvti control settings just start up map.

https://drive.google.com/file/d/0B-PB8SRgAeeGQjNhZTdaMzhfSjQ/view?usp=sh...

maubri
Offline
Last seen: 5 years 5 months ago
Joined: 10/30/2014 - 16:33
Hi Folks,

Hi Folks,

am going to recieve a ems s2 30-6030 this week for my eg k20a JDM setup.

Basically everything is still stock

Engine is K20A from a JDM Integra type-r 2002

Fuel pump is walbro 255lph intank

Fuel system stock rail but with fuel regulator set at 50psi on idle

custom 2.5 inch intake

custom 2.75inch exhaust

hybrid racing race 4-2-1 header

fuel is pump gas 

I would really appreciate if someone has a calibration good for this setup at least good enough to start with and drive a bit not like a base map which you have to tune before driving properly.

Thanks alot guys

al_v
Offline
Last seen: 4 years 11 months ago
Joined: 11/27/2014 - 04:52
Hi folks

Hi folks

 I need an starting map for 30-6100 EMS, 1996 JDM  Toyota Supra 3000cc ( japanese engine with ported heads and brian crower 264 cams ,1000cc high imp injectors , 93 octane pump gas , AEM 3.5 bar map sensor.

 

Thanks for your help.

educated guess ...
Offline
Last seen: 5 years 5 months ago
Joined: 12/05/2014 - 05:35
Startup calibrations for 2001

Startup calibrations for 2001 S2000 AP1

AEM Series 2

Stock engine

header

K&N cold air

 

othe99
Offline
Last seen: 5 years 5 months ago
Joined: 12/06/2014 - 21:16
 

 

I need start up calibration for 2000 S2k Ap1

Stock motor

AEM series 2

kraftwerks supercharge

1000cc grams fuel injectors

320 lph grams fuel pump

skunk2 4 bar MAP

Invida header

Invidia cat back

Stage 2 racing clutch

I would really appreciate if someone has a calibration good for this setup at least good enough to start with and drive a bit not like a base map which you have to tune before driving properly.

Thank you 

jkennedy1007
Offline
Last seen: 4 years 12 months ago
Joined: 11/27/2014 - 23:27
HONDA S2000 02' 

HONDA S2000 02' 

stock motor 

AEM EMS series 2              30-6052

AEM A/F LSU 4.9                30-4110

AEM Boost Gauge               30-4406

AEM Boost Control Solenoid 30-2400

Garrett 60. Turbo

ID injectors 725 cc

Walbro Fuel 255

Intercooler air to air  

 

would like a base map that has 10 psiyes

Thankslaugh

 

 

 

supra95jz
Offline
Last seen: 5 years 5 months ago
Joined: 12/15/2014 - 15:33
TOYOTA HILUX 1988.

TOYOTA HILUX 1988.

2JZ-GTE swap.

AEM series 2 standalone.

ported heads with TITAN 272 cams.

DENSO 1000cc injectors.

93 octane pump gas.

AEM 5bar MAP sensor.

Je pistones , BC con rods.

R154 5 speed

stock wiring harness.

stock O2 sensor.

pcvirus
Offline
Last seen: 5 years 5 months ago
Joined: 12/20/2014 - 08:14
30-6040 ems2

30-6040 ems2

honda civic 1994

stock obd1 wiring

b18c5 swap

stock injectors

stock map sensor

95 octane fuel

pcvirus
Offline
Last seen: 5 years 5 months ago
Joined: 12/20/2014 - 08:14
Are you connect sensore

edit:
Are you connect sensore ground d21 d22 connect power ground

Pages