S2 Calibration Requests: please ask for maps in THIS THREAD ONLY | Page 7 | AEM
242 posts / 0 new
Last post
Booster537
Offline
Last seen: 2 years 5 months ago
Joined: 04/20/2018 - 05:34
30-6050 EMS, 2001 Integra

30-6050 EMS, 2001 Integra Type R, 1.8L, stock injectors 240cc/min, 93 octane pump gas, stock Honda MAP sensor, Walbro 255LPH fuel pump, B&M adjustable FPR.

Just trying to get a stock ITR calibration to see if my stock ECU is the source of misfires, THANK YOU... feel free to email me back at booster537@hotmail.com

sailchessi
Offline
Last seen: 2 years 4 months ago
Joined: 05/03/2018 - 08:38
Hello, 

Hello, 
I bought a big turbo drag car, 2002 S2000, all blown up (engine/trans) with a tuned AEM Series 2.  I transplanted my good MY 2000 S2000 F20C original and trans into this shell and used the OEM ECU for an initial run.  I need to set it back to full OEM stock ASAP to get to a track day.  My key immobilizer from my ECU has now acted up after battery disconnected and I don't want to waste money on a "All keys lost" trip to Honda since I was going to pull the stock ECU anyway.

Currently just a simple K&N intake, OEM exhaust for now, stock injectors,  everything.  I desperately need to load a base map into my "new" AEM 2 to get the car going and eliminate the OEM ECU which is now balky.
Thanks, 
​​​​​​​Stuart

Chris2388
Offline
Last seen: 2 years 4 months ago
Joined: 05/18/2018 - 13:16
Looking for a Base map for a

AEM V2 in a 01 Intergra type-R with a J-series swap 

Looking for a Base map for a 30-6051, 2001 Acura Integra, with a stock J35a4 Block, with stock J32a2 heads, headers, Cold air intake. Cl type s 6 speed, stock injectors for the 3.5, stock honda map sensor

 

 

birotore
Offline
Last seen: 2 years 4 months ago
Joined: 02/24/2017 - 16:03
hello to all !! I need a good

hello to all !! I need a good map for Toyota aristo swap manual transmission with injectors 440cc stock high impedance intercooler air water filter direct exhaust boost 1.1 bar (if possible)! for ecu aem v2 standalone

Tooned
Offline
Last seen: 2 years 1 month ago
Joined: 05/31/2018 - 05:38
AP1 S2000 boosted

AP1 S2000 boosted

Series 2 box

Looking for a good base map with TPS fuel Map ignition. Boost comp.   Mainly looking for a rough idea on tuning stratagies i dont care what injectors turbo etc the map is from just maininly setup for TPS fuel Map ignition and boost comp.  

Thanks. 

kalel1
Offline
Last seen: 2 years 3 months ago
Joined: 06/13/2018 - 05:51
Hi! Looking for a basemap to

Hi! Looking for a basemap to start my car and take it to the tuner.

TOYOTA 95 Supra Single Turbo JDM​ on aem ems v2

Ktune tb 90mm with hypertune cnc replica intake manifold with idle control valve

​5Bar aem map sensor

​ID2000 injectors

Titan 272 cams + springs

Stock block 

Full 3" exhaust / twin scroll twin wastgate doc race exhaust mainfold 

Precision 6870 1.15 AR

Ets 5" intercooler  

Inovate AFR wideband

98 oct fuel / E85 (flex instaled but not jet pluged pins in aem)

Vss working.

​Thanks!

Hondista
Offline
Last seen: 2 years 3 months ago
Joined: 06/14/2018 - 05:02
AEM Series 2 30-6052

AEM Series 2 30-6052

2000 Honda S2000

F20C2 stock 

Stock 360cc injectors

97 Octane, stock fuel pump

Stock map sensor

Modifications:

BMC CDA specific Air filter

Polished intake with 70mm throttle body Skunk2

theflon intake gasket

60psi AEM adjustable fuel pressure regulator

Racing 66mm full exhaust

AEM wideband 

Can give me good Calibration with VTEC 4500rpm please?

sorry for my english

thanks

KrazyS0b
Offline
Last seen: 11 months 3 weeks ago
Joined: 06/21/2018 - 17:22
AEM Series 2, 30-6601

AEM Series 2, 30-6601

1989 Nissan 240SX

S13 Red Top SR20DET 2000cc

Splitfire Coils

SARD 800cc Top Feed Injectors

SARD Top Feed fuel rail

SARD FPR

Garrett GT35R

3" Turbo Back Exhaust

AEM UEGO

AEM CAS Trigger Disk

AEM 5 bar MAP sensor

AEM IAT Sensor

AEM EGT Sensor

Greddy Intake

Looking for Base Map to start up car. 

Thank you :)

Brklyn1988
Offline
Last seen: 2 years 2 months ago
Joined: 06/27/2018 - 06:24
AEM Series 2 6601-0386 serial

AEM Series 2 6601-0386 serial number

1997 240sx

S13 Sr20det red top

Stroked 2.2L

BC 272 cams

Nismo 550cc Injectors

-8an feed line -6an return line

2x walbro 450lph pumps

AEM 5bar Map sensor

GM IAT sensor

PTE 6262 turbo

Greddy Intake manifold

Can i have a base map please for start up

Tahir
Offline
Last seen: 2 years 2 months ago
Joined: 05/23/2018 - 15:06
Hi people. Can anyone provide

Hi people. Can anyone provide a base tune for aem ems v2?

Rough spec is....
B18c4/GSR motor 9:1 cr
I.d 1300cc
Walbro 450
Precision 6266
Aem epm
K20 coils
4 bar map sensor

Just need a base tune to get it running. Will take it to a tuner for a proper tune afterwards. Any help or pointers will be greatly appreciated.

Thanks. Tahir.

SIpha
Offline
Last seen: 2 years 1 month ago
Joined: 07/13/2018 - 12:12
Hey all,

Hey all,

I've just installed my new AEM EMS V2 into my S2K. I'm in need of a working base so I can use my car while I wait for my tuner to send me a tailored map. This is a UK car so its an '04 but still a 2.0 designation AP1. It is NON dbw (cable throttle).

Specs as follows:

AEM EMS V2 (30-6052), Honda S2000 AP1 2.0 2004, 2.0, standard pump gas (97-99RON octane UK), AEM UEGO 30-0300 Wideband.

Engine mods are:

J's Racing Header, BERK HFC, Fujitsubo Legalis R, K&N FIPK, AEM EMS V2.

Thanks !

Mustb18
Offline
Last seen: 5 months 2 weeks ago
Joined: 08/04/2018 - 21:37
Need a base map tune for aem

Need a base map tune for aem ems v2  s2000 1000cc inhibits turbo 

 

 

robthisdel
Offline
Last seen: 2 years 1 month ago
Joined: 08/16/2018 - 13:05
hi i looking for base map to

hi i looking for base map to startup car

ems2 30-6601

Nissan 240sx 95

S13 sr20det base with p11 vvl head (sr20vet)

splitfire coil (s15)

mazworx intake

mazworx fuel rail

top feed id1000cc injector

aeromotive fpr

garrett gtx3071r

3inches full exhaust

aem uego

aem tru boost controller

aem iat

aem map 3,5 bar

bosch 044 fuel pump

thank you

conedodger67
Offline
Last seen: 1 year 6 months ago
Joined: 10/23/2018 - 14:59
AEM EMS V2 30-6051

AEM EMS V2 30-6051

I race/autocross a 1990 Honda CRX si with a 2001 Acura J32a2 type S V6 swap engine, 93 pump gas, stock injectors, stock MAP sensor, 3" cold air intake, headers with CAT delete. I installed the EMS and loaded the AEM base map provided for the 6051 and took it to my tuner. He was able to get it to start and make some power up to 3000 rpm, but then it sputters and power drops off. He has not had much luck figuring out what is wrong with it. Can anyone help me out and send a map file for the j32a2 that will at least rev smoothly up to redline? The tuner should then be able fine tune it for better performance.

Thanks!

Beechan215
Offline
Last seen: 1 year 10 months ago
Joined: 04/05/2018 - 17:31
2002 s2000

2002 s2000
Log manifold
60trim turbo
800cc deatschwerk injectors
340 deatschwerk fuel pump
Skunk2 4bar map sensor
Aem EMS v1

Ike9901
Offline
Last seen: 1 year 2 months ago
Joined: 11/07/2018 - 06:51
Aem series 2 6040-0843

Aem series 2 6040-0843

1998 Honda Civic 

B16B aftermarket intake tube, Itr 4-1 header 2.5 full exhaust.

93 octane gas

dalegneiting
Offline
Last seen: 1 year 3 months ago
Joined: 07/25/2017 - 20:36
has anyone recieved so help

has anyone recieved so help in this post ever?

dalegneiting
Offline
Last seen: 1 year 3 months ago
Joined: 07/25/2017 - 20:36
has anyone recieved so help

has anyone recieved so help in this post ever?

Tech3
Offline
Last seen: 1 year 9 months ago
Joined: 11/30/2018 - 11:47
Hello, Im in need of a base

Hello, Im in need of a base calibration map for startup on a 2002 is300 (5spd) with an ARISTO 2jzgte-vvti swap. This is just to start up and check for leaks until our Tuner comes. Thanks

MODS:

stock ECU and harness with original MAF

stock is300 ignition coils with stock igniter

AEM v2 dezod standalone with BOOM Slang harness

Precision 6262 BB turbo 

Injector dynamics 1050cc injectors

AEM IAT (30-2010)

AEM MAP (30-2130-50)

45psi fuel pressure with AEROMOTIVE 340 single fuel pump

california 91 octane

koukidiego
Offline
Last seen: 1 year 6 months ago
Joined: 12/14/2018 - 09:31
Looking for a startup basemap

Looking for a startup basemap for my S14 with a S14 Zenki SR20DET.
Tomei Poncams
Grams 1000cc injectors E85
AEM IAT Sensor
AEM 2 Bar/30 PSI MAP sensor
AEM X-Series UEGO Wideband
AEM Boost Controller
GT2860RS with .86 housing

Thanks in advance!

 

Nismo
Offline
Last seen: 1 year 9 months ago
Joined: 12/17/2018 - 22:12
Need Start Up Calibration

Need Start Up Calibration

AEM EMS series 2              30-6052

2003 Honda S2000 AP1

Build motor with 2.4L stroker kit with 10.1 compression

Head build stage 4 from inline pro, with Brian Crower stage 2 cams shaft and Skunk2 cams sprockets

port and polish intake manifold

AEM fuel rail and AEM fuel pressure regulator

Factory injectors and map sensor

AEM cold air intake system, cheap headers, test pipe and Tanabe Medallion exhaust system

Any help would be Appricated

 

TangoVTEC
Offline
Last seen: 1 year 8 months ago
Joined: 01/20/2019 - 14:36
Is possible to have a start

Is possible to have a start up map for my supercharged S2000?

UK Spec 2004 - AP1 (2.0)

Stock engine

Rotrex C38-91

ID1000 injectors 

Hondata 4 bar MAP sensor

Stock header/exhaust manifold

Decat/Test pipe

Tanabe Touring Medalion exhaust

It’s very cold here in the UK at the moment, whether that affects things or not?

The map I have will not let the car idle.  It cranks, fires then dies immediately with or without throttle.

Thanks in advance for any help.

Kaneki_ken
Kaneki_ken's picture
Offline
Last seen: 1 year 8 months ago
Joined: 01/20/2019 - 13:12
03 rsx type s

03 rsx type s

K20a2 

Rdx 410cc injectors

Skunk2 ultra manifold 70mm tb

Obx racing header ktuned 3 inch exhaust and muffler 

 

Kaneki

poweredbyken
poweredbyken's picture
Offline
Last seen: 1 year 7 months ago
Joined: 01/27/2019 - 18:11
AEM V2 1jz non vvti

AEM V2 1jz non vvti (driftmotion)

In need of the base map tune.

Stock motor

Stock 380cc injectors

3" downpipe

3" exhaust

FMIC

 

pomeranian13
Offline
Last seen: 1 year 6 months ago
Joined: 02/12/2019 - 09:31
Looking for tuning

Looking for tuning calibration or successful start for tuning of the following:

AEM 30-6040 EMS

1995 Acura Integra, LS (B18B motor)

Stock compression with forged pistons, H-beam rods, stock cams, stainless valves with dual springs and titanium retainers.

GT 35 Turbo, 3" downpipe to high flow cat and 3" the rest of the way back.

RC 550CC injectors

AEM Fuel Rail, filter and regulator.

AEM UEGO Wideband O2, AEM FP, Oil P and Boost gauges.

AEM 2 bar Map sensor

AEM Boost solenoid

MDS 6AL ignition with Blaster Coil, Stock distributor with MSD cap for external coil.

Adustable cam gears

Looking to run 10-12 PSI max really... just want to be reliable and fun to drive.

kxk
Offline
Last seen: 1 year 7 months ago
Joined: 02/12/2019 - 13:37
1JZGTE  (non VVTi)

1JZGTE  (non VVTi)
AEM Series 2 (from Drift Motion)
440CC Bosch "Big Green" Injectors
350lph AEM Fuel Pump
GT3037 .73AR Single Turbo
Highflow Intake with 90mm TB
3" DP; High Flow Cat, and Exhaust
Wastegate set to 15PSI
Bosch 4.9 w/ Spartan 2 Controller
Stock MAP (2.3 Bar) Sensor

Using the injector change wizard has not been helpful and has been running pig rich. After pulling fuel map down by scaling the fuel map to 1.6ms at idles near 14.5 when compensated for O2 Feedback (1.24ms). 

This has held up to a preliminary test drive.

Would appreaciate it if someone has a similar setup that has a map they are willing to share for comparison

tpalmer0406
Offline
Last seen: 1 year 7 months ago
Joined: 02/15/2019 - 08:53
Need Start up Calibration

Need Start up Calibration File

1989 Supra Turbo

7mgte

Stock

3in full exhaust

AEM Series 2 ECU (SN# 6050-1986)

Controlled Motors
Offline
Last seen: 1 year 6 months ago
Joined: 02/11/2017 - 01:16
1990 nissan 240sx

1990 nissan 240sx

30-6600 series 2

Built ka-t, stock compression, stock cams, garrett gt35 turbo w/ 44mm tial wastegate 

I.D. 1050x injectors, aem 3 bar map sensor, aem cas wheel, stock ignition system, innovate lc-1 connected to ems for FB control, aem ebcs, gm iat, FPR set at 43psi, walbro 450 pump

vehicle is on 93 fuel and will be running about 10psi of boost for now. VE table is scaled between -13.1 to 15psi 

 

Scalla1384
Offline
Last seen: 1 year 6 months ago
Joined: 01/03/2019 - 07:33
1993.5 mk4 Supra

1993.5 mk4 Supra

2jz GTE stock engine
AEM 30-6100 series 2
Single turbo 6766
AEM 3.5 bar MAP, IAT, AEM inline wideband
FID 1000cc injectors
R154 swap
Stock auto TT harness
Stock fuel pump
93 pump gas

RaGeKaGe85
RaGeKaGe85's picture
Offline
Last seen: 1 year 6 months ago
Joined: 03/01/2019 - 20:01
Hi.  Looking for a base map

Hi.  Looking for a base map or a starting place to have professionally tuned.

1996 Civic DX Hatch with OBD1 jumper harness

Engine: JDM B18C, rebuilt with OEM internals to OEM specs, matching P72 head was ported/polished and had a valve job

ECM 30-6040-0982 Series 2

BBK intake manifold, 70mm throttle body, OEM MAP sensor, OEM IAT sensor

I.D. 1000cc injectors, AEM 320LPH @ 43PSI fuel pump, AEM high volume fuel rail, AEM FPR & Aeromotive inline filter

91 oct. pump gas

JDM Mugen headers, Bosch 4.9 with AEM UEGO controller gauge, 2.25" exhaust to the back

Thanks in advance!

-96 Civic Hatch B18C

Pages