v2 Serial Data Information | AEM
9 posts / 0 new
Last post
DereckR
Offline
Last seen: 2 years 1 month ago
Joined: 08/24/2014 - 14:34
v2 Serial Data Information

Hey Guys,

 

Can someone confirm or point in the right direction what all the serial port will output. I wanting to use that data in hyperterminal to view raw data and make a gauge array with this. The issue is I don't have the ability to power mine up yet to know what parameters are dumped to the serial port the format or anything.

 

Any help would be greatly appreciated.

 

Thanks,

Dereck

AEM_GN
Offline
Last seen: 4 years 4 months ago
Joined: 02/18/2014 - 09:55
Dereck.

Dereck.

What you can do is open the AEMTuner software. At the top of the screen click on Wizards -> Setup Wizards -> Telemetry: Serial -> Click the 02v02 firmware(or another one if you are using a different firmware) and hit apply. Close the screen.

Than go to Tools -> Configure Telemetry -> Serial Telemetry. There it will list all of the outputs. Click show Info...

DereckR
Offline
Last seen: 2 years 1 month ago
Joined: 08/24/2014 - 14:34
And the serial is outputing

And the serial is outputing all this information real time while car is running?

AEM_NS
Offline
Last seen: 1 hour 5 min ago
Joined: 06/06/2014 - 09:31
The serial datastream is

The serial datastream is active any time the EMS is powered ON.  

DereckR
Offline
Last seen: 2 years 1 month ago
Joined: 08/24/2014 - 14:34
Thank, Ok so i have been

Thank, Ok so i have been using Mo Serial on ubuntu to view the screen and the data i receive is jumbled? Is ther something i have setup wrong figured it would be more readable format?

 

 

DereckR
Offline
Last seen: 2 years 1 month ago
Joined: 08/24/2014 - 14:34
Here are the photo's attached

Here are the photo's attached of the data we are receiving?

 

 

 

 

 

 

I can't seem to get a consistent response? We are wanting to use this data for a custom gauage but i cant seem to get the info coming out correct?

 

balla_EG6
Offline
Last seen: 2 years 2 months ago
Joined: 06/15/2017 - 20:10
any updates ?

any updates ?

I just did a serial-bluetooth adapter that sends serial data from V2 box to my mobile, but I´m getting the same things as you.

 

2004 Lancer Evolution 8 GSR

AEM_NS
Offline
Last seen: 1 hour 5 min ago
Joined: 06/06/2014 - 09:31
Sounds like you're just

Sounds like you're just looking at the raw data stream. You need to apply the message structure outline in Telemetry Info in order to go from raw to data that makes sense.

balla_EG6
Offline
Last seen: 2 years 2 months ago
Joined: 06/15/2017 - 20:10
I will try later. Im pretty

I will try later. Im pretty sure I already did that, but...

btw, do you know an app that can deal with aem serial data ? I was trying Tunerview but they didnt finish AEM protocol yet.

2004 Lancer Evolution 8 GSR