view or log crank/cam hall inputs (ala oscilloscope) | AEM
2 posts / 0 new
Last post
spoolby
Offline
Last seen: 3 years 3 weeks ago
Joined: 10/11/2014 - 07:58
view or log crank/cam hall inputs (ala oscilloscope)

I'm hoping to use the AEMpro or AEMlog like an oscilloscope to view my cam and crank signals.. is it possible?

AEM_NS
Offline
Last seen: 3 days 3 hours ago
Joined: 06/06/2014 - 09:31
No, not really.  The raw

No, not really.  The raw states of the signal inputs are not passed through as displayed channels.  There are channels that will tell you if the signals are being properly received though.