what size nozzle recommend please - 410whp 54kg.m 2000cc turbo | AEM
2 posts / 0 new
Last post
jongpark
Offline
Last seen: 3 months 1 week ago
Joined: 04/30/2020 - 09:43
what size nozzle recommend please - 410whp 54kg.m 2000cc turbo

hello sir 

https://youtu.be/7GfVqqmRjXs

i am from south korea

 

i tuned LAP3 2018 Hyundai veloster N  ( OEM 275HP )  

 

spec : 2000cc single turbo  275hp (oem)

tuned : Garette 2867r gen2 single turbo  & forged conrod  & clutch & Aem methanol kit ( aem afr guage + 18L BIG TANK ) 6:4 use  /  95ron premium gasoline use it 

 

my engine spec is  oem 230hp >  1.2bar low boost  346hp 41kg.m     1.65bar high boost  411hp 51kg.m  with aem methanol kit  500cc / adapt  behind throttle body  spacer 1port   using solenoid valve

 

when i test 1.65bar  100-200km   6000~7000rpm  afr is  12.5:1 ~ 13:2   

 

https://youtu.be/7GfVqqmRjXs     this engine oem railbar (250bar )  fuel pump & gdi injector capatcity is max...........the fuel is at its maximum,but the 

attached dynograph is insufficient from 6500rpm to 7200rpm

 

aem controller setting   is   start : 12.5psi ~  full open ; 22psi

 

 

question : 

i need more aem methanol capacity  what kind  nozzle is correct ?

 

i have more nozzle  1000cc,   now i use 500cc 

 

rpm8300@naver.com email please

 

 

 

 

 

 

 

 

AEM_NS
Offline
Last seen: 1 hour 5 min ago
Joined: 06/06/2014 - 09:31
See the chart on pg 11 of the

See the chart on pg 11 of the 30-3300 instructions: https://www.aemelectronics.com/files/instructions/30-3300-Water-Methanol...